SYNOXX

The SYNOXX 16FMTPOM4-5M is a 16-fibre OM4 multimode MPO-to-MPO Type B (crossover)
plenum trunk cable delivering 5-metre within-cabinet and short cross-connect runs for
parallel optic systems — purpose-built for same-cabinet 100G and 400G connections where
3m is too short and 10m creates unnecessary cable bulk, supporting 2× simultaneous 100G
SR8 links, 1× 400G SR8 link, or 2× 100G CWDM8 wavelengths in a single 16-fibre run, with
an OFNP plenum-rated jacket for air-handling space code compliance. Built to ≤0.35dB
insertion loss at 850nm and 1300nm, MPO female connectors on both ends, Type B crossover
polarity, OM4 50/125µm multimode glass, and operating temperature -10°C to 60°C. IC
Certified for Canada and the US.

The SYNOXX EQP85Y-01D is a 100G QSFP28 SR4 optical transceiver delivering 100Gbps 
over multimode fiber using a 4×25G parallel VCSEL array — transmitting and receiving 
across four simultaneous 25G optical lanes via an 8-fiber MPO ribbon connector, 
supporting distances up to 100m on OM3 and OM4 multimode fiber for high-density 
100G data centre switching, 100G parallel breakout deployments, and any 100G 
application requiring MPO-based multimode fiber infrastructure. Compliant with 
QSFP28 MSA and IEEE 802.3bm, featuring integrated Digital Diagnostic Monitoring 
(DDM) for real-time temperature, voltage, TX/RX optical power, and bias current 
monitoring with low power consumption. Hot-pluggable, RoHS compliant, and IC 
Certified.

The SYNOXX ESP312X-10D is a 25G SFP28 LR optical transceiver delivering 25.78Gbps 
transmission over single-mode fiber (SMF) up to 10km using a 1310nm DFB laser 
transmitter and PIN receiver — engineered for 25G long-reach data centre 
interconnects, metro-edge telecom links, campus backbone 25G fiber uplinks, and 
5G CPRI fronthaul over extended SMF distances. Features Digital Diagnostic Monitoring 
(DDM) via I2C for real-time temperature, voltage, TX/RX power, and bias current 
monitoring, compliant with SFP28 MSA, IEEE 802.3cc, and SFF-8472 standards, with 
low power consumption and a standard LC duplex connector. Hot-pluggable, RoHS 
compliant, and IC Certified.

The SYNOXX EDQPY-5-26 is a 100G QSFP28 to QSFP28 passive direct attach copper 
(DAC) cable delivering 100Gbps over a 5-metre 26AWG twinax connection — purpose-built 
for extended-rack and cross-row 100G deployments where 1m and 3m cables fall short, 
including end-of-row switch connections, long cable tray runs, and flexible spine-to-leaf 
links requiring extra reach on the passive copper budget. Based on a 4×25G architecture, 
compliant with SFF-8636 and IEEE 802.3bj, with a two-wire I2C interface for monitoring 
and control, low power consumption, and low crosstalk across the full 5m run. 
Hot-pluggable, RoHS compliant, and IC Certified.

The SYNOXX EB232X-10D/EB322X-10D is a matched 25G SFP28 BiDi transceiver pair 
enabling bidirectional 25Gbps transmission over a single strand of single-mode 
fiber (SMF) up to 10km using complementary wavelengths of 1270nm TX/1330nm RX 
and 1330nm TX/1270nm RX. Supports data rates up to 25.78125Gbps with Digital 
Diagnostic Monitoring (DDM), DFB transmitter, APD receiver, and power consumption 
of ≤1.5W per module, compliant with IEEE 802.3cc, SFF-8431, SFF-8432, and 
SFF-8472 standards. Hot-pluggable, RoHS compliant, and IC Certified.

High-performance 100G QSFP28 to 4x SFP28 passive DAC breakout cable designed for data center and high-speed networking applications, featuring low crosstalk, low insertion loss, and excellent signal integrity.

The SYNOXX EDQPY-4SP3 is a 100G QSFP28 to 4×SFP28 passive direct attach copper 
(DAC) breakout cable that splits a single 100G QSFP28 port into four independent 
25G SFP28 connections over 3 metres of twinax copper — enabling cost-effective 
25G server and storage connectivity from a 100G spine or leaf switch port without 
additional transceivers. Compliant with IEEE 802.3bj, SFF-8636, and SFF-8402 
standards, featuring EEPROM support for device identification, low insertion loss, 
and passive operation with no active components required. Hot-pluggable, RoHS 
compliant, and IC Certified.

The SYNOXX EDSP2X-5-26 is a 25G SFP28 to SFP28 passive direct attach copper (DAC)
cable delivering 25.78Gbps over a 5-metre 26AWG twinax connection — built for
extended-rack and end-of-row 25G deployments where 1m and 3m cables fall short,
including cross-rack leaf-to-server links, overhead cable tray runs spanning multiple
rack units, and 100G breakout target connections requiring routing slack across
rack boundaries. Compliant with SFP28 MSA and SFF-8402, featuring a hot-pluggable
SFP28 form factor, fully passive copper with no active components, and operating
temperature range of 0°C to 70°C. Hot-pluggable, RoHS compliant, and IC Certified.

High-speed 100G QSFP28 to QSFP28 DAC cable, SFF-8636 compliant, IEEE 802.3bj support, low power consumption, excellent signal integrity.

The SYNOXX EDQPY-3 is a 100G QSFP28 to QSFP28 passive direct attach copper (DAC) 
cable delivering 100Gbps over a 3-metre twinax connection using a 4×25G lane 
architecture — purpose-built for cross-rack and adjacent-rack 100G connections where 
1-metre cables fall short. Compliant with SFF-8636 and IEEE 802.3bj, featuring a 
two-wire I2C interface for monitoring and control, low crosstalk design, and power 
consumption under 1.5W per end. Hot-pluggable, RoHS compliant, and IC Certified.