New products

The SYNOXX EDSP5X-3 is a 56G SFP56 to SFP56 passive Direct Attach Copper (DAC) cable designed for high-speed short-distance network connections. Supporting data rates up to 56 Gbps over a 3-metre twinax copper cable, it is ideal for server-to-switch, storage, leaf-to-server, and adjacent-rack connections. The cable uses PAM4 signaling, supports hot-pluggable SFP56 interfaces, and provides a low-power, low-latency, cost-effective alternative to optical transceivers for short-reach 56G Ethernet deployments.

The SYNOXX EDQD400-2QPx is a high-speed 400G QSFP-DD to 2x200G QSFP56 Direct Attach Copper breakout cable designed for short-distance, high-bandwidth network connections. It supports 400Gbps aggregate data rate using PAM4 signaling, making it suitable for data centers, high-performance computing, storage networks, telecom, and switch-to-switch interconnections.

The SYNOXX EDQD400-4QPx is a high-speed 400G QSFP-DD to 4x100G QSFP56 breakout DAC cable designed for data centers, high-performance computing, storage networks, switches, routers, and telecom infrastructure. It supports 400Gbps aggregate data rate using PAM4 signaling and is available in short-distance passive copper cable lengths.

Outdoor 5G CPE with an omnidirectional antenna system that connects to the best available network without antenna realignment. Built-in eSIM and microSIM support, GNSS positioning (GPS, Galileo, BeiDou, QZSS), and Gigabit Ethernet with PoE-in. IP67-rated and EN 60945 maritime certified for ports, marinas, industrial sites, and urban or backup deployments.

Industrial-grade 1G/2.5G multi-mode SFP module for fiber links up to 550 m over 850 nm with a duplex LC connector. Built-in DDM digital diagnostics monitor optical power, voltage, temperature, and laser bias current in real time. Ideal for enterprise networks, data centers, industrial deployments, and ISP infrastructure.

Industrial-grade 1G/2.5G single-mode SFP module for long-distance links up to 20 km over 1310 nm with a duplex LC connector. Built-in DDM digital diagnostics monitor optical power, voltage, temperature, and laser bias current in real time. Ideal for backbone links, campus networks, industrial deployments, and ISP infrastructure.

The SYNOXX EDQD400-4QPx is a high-speed 400G QSFP-DD to 4x100G QSFP56 breakout DAC cable designed for data centers, high-performance computing, storage networks, switches, routers, and telecom infrastructure. It supports 400Gbps aggregate data rate using PAM4 signaling and is available in short-distance passive copper cable lengths.

The MikroTik ATL 5G R16 (ATLGM&RG520F-EU) is MikroTik's first outdoor 5G CPE with built-in eSIM — a rugged, IP66-rated, snow-resistant outdoor unit combining a 16 dBi high-gain directional antenna array (4× mid-band + 4× low-band), 5G Release 16 modem with LTE Cat 20, 4×4 MIMO, full Band 28 support for rural low-band coverage, eSIM with MikroTik Connectivity alongside Micro SIM, 1× Gigabit Ethernet with 802.3af/at PoE-in, dual-core ARM64 88F3720 CPU at 800 MHz, 512 MB RAM, passive cooling, and RouterOS v7 License Level 3. Install it on any rooftop, pole, or mast, power it with a single PoE cable, and be online in minutes with no SIM card required.

The MikroTik GPOE-USB lets you power USB-C and 5V DC devices directly from PoE while keeping 2.5 Gigabit Ethernet passthrough. It converts 802.3af/at PoE input into stable 5V power with up to 3A / 15W output, making it ideal for hAP ax lite, hAP be lite, tablets, Raspberry Pi boards, sensors, controllers, and other USB-C or low-voltage 5V devices.

The MikroTik hAP be lite is an affordable Wi-Fi 7 router and access point with RouterOS v7, dual-band wireless, 1x 2.5G Ethernet port, 3x Gigabit Ethernet ports, USB-C power, 512 MB RAM, and compact desktop design. It supports Wi-Fi 7 Multi-Link Operation and is ideal for homes, small offices, labs, and users who need advanced RouterOS features in a small and budget-friendly device.