25G/100G Solutions

The MikroTik DQ+BC0003-DS+ is a 3m passive QSFP56 breakout DAC cable that splits a single 200G port into four independent 50G connections. It replaces the XQ+BC0003-XS+ at the same price while adding 200G to 4×50G support, and retains full backward compatibility with 100G to 4×25G and 40G to 4×10G breakout modes. Purpose-built for MikroTik CRS812 DDQ and CRS804 DDQ 200G and 400G switch deployments.

The MikroTik DDQ+DA0001 is a 400G QSFP-DD passive direct attach copper cable (DAC), 1 metre long — the shorter of two DAC options MikroTik offers for the CRS812 and CRS804 400G platforms. With integrated QSFP-DD modules on both ends, it requires no transceivers, no fiber, and no power budget management — simply plug it in and achieve full 400G connectivity between adjacent devices in the same rack. At USD 79, it is the lowest-cost entry point for 400G connectivity on the CRS812 and CRS804 platforms.

XQ+BC0003-XS+ is a versatile QSFP28 to 4x SFP28 break-out cable by MikroTik. Designed for optimized connectivity, it lets you seamlessly connect multiple 25 Gigabit devices to your CRS504 or CCR2216 devices.

The SYNOXX EDSP2X-5-26 is a 25G SFP28 to SFP28 passive direct attach copper (DAC)
cable delivering 25.78Gbps over a 5-metre 26AWG twinax connection — built for
extended-rack and end-of-row 25G deployments where 1m and 3m cables fall short,
including cross-rack leaf-to-server links, overhead cable tray runs spanning multiple
rack units, and 100G breakout target connections requiring routing slack across
rack boundaries. Compliant with SFP28 MSA and SFF-8402, featuring a hot-pluggable
SFP28 form factor, fully passive copper with no active components, and operating
temperature range of 0°C to 70°C. Hot-pluggable, RoHS compliant, and IC Certified.

25G SFP28 LR transceiver, 1310nm, 10km over SMF, LC duplex, DDM support, low power consumption, hot-pluggable, ideal for data center and telecom applications.

The MikroTik S+31DLC10D is a new industrial-grade 10G SFP+ single-mode module for long-distance fiber links up to 10 km using the widely supported 1310 nm wavelength and dual-LC connector. It delivers all the essential capabilities of the popular XS+31LC10D at almost half the price — purpose-built for customers who need reliable 10G connectivity without 25G SFP28 overhead. Features built-in DDM for real-time monitoring of optical power, temperature, voltage, and laser bias current.

High-speed 100G QSFP28 to QSFP28 DAC cable, SFF-8636 compliant, IEEE 802.3bj support, low power consumption, excellent signal integrity.

The SYNOXX EDQPY-3 is a 100G QSFP28 to QSFP28 passive direct attach copper (DAC) 
cable delivering 100Gbps over a 3-metre twinax connection using a 4×25G lane 
architecture — purpose-built for cross-rack and adjacent-rack 100G connections where 
1-metre cables fall short. Compliant with SFF-8636 and IEEE 802.3bj, featuring a 
two-wire I2C interface for monitoring and control, low crosstalk design, and power 
consumption under 1.5W per end. Hot-pluggable, RoHS compliant, and IC Certified.

The MikroTik XS+85LC01D is a tri-rate 1G/10G/25G multimode optical transceiver — SFP / SFP+ / SFP28 form factor, 850nm VCSEL, dual LC UPC connector, 100m reach on OM3/OM4 multimode fibre, built-in digital diagnostics (optical power, supply voltage, temperature, laser bias current monitoring), -40°C to +85°C tested ambient, MTBF ~100,000 hours at 25°C. No FCC or IC certification published. USD 59.00. The correct short-reach multimode transceiver for RB5009, CCR2116, netPower series, CRS, and CSS switches requiring 1G, 10G, or 25G SFP/SFP+/SFP28 connectivity over existing multimode fibre plant at distances up to 100 metres.

The MikroTik XQ+CM0000-XS+ is a QSFP28 to SFP28 form-factor converter — a passive adapter that allows any SFP / SFP+ / SFP28 module (1G / 10G / 25G) to be inserted into a QSFP28 100G/40G port, enabling the use of existing SFP28 transceivers and DAC cables in QSFP28 port-equipped switches without a separate SFP28 switch layer. Tested ambient temperature -20°C to +85°C, MTBF ~100,000 hours at 25°C. No certifications published. USD 59.00. The correct port-conversion accessory for CRS504-4XQ-IN, CRS518-16XS-2XQ-RM, CRS510-8XS-2XQ-IN, and any MikroTik or third-party switch with QSFP28 ports where existing SFP28 25G, SFP+ 10G, or SFP 1G modules need to be utilised without rewiring or adding a downstream switch.