RB5009UPr+S+IN
zoom_out_map
chevron_left chevron_right

RB5009UPr+S+IN

A new version of our popular heavy-duty RB5009 router with PoE-in and PoE-out on all ports. Perfect for small and medium ISPs. 2.5 Gigabit Ethernet & 10 Gigabit SFP+, numerous powering options.

US/Canada
We only offer IC Certified products. For international products, contact us.
Please note!
Ship Charge Will Display As Free Until Ship Address / Location Is Provided To Calculate Ship Charge.

It’s all about the power...

This version of the RB5009 has all the bells and whistles of the previous model: Gigabit Ethernet, 2.5 Gigabit Ethernet, and a 10 Gigabit SFP+ cage for fiber connectivity. It has speed, power, and durability. But this time, we have added PoE-in & PoE-out on all eight Ethernet ports. Combined with the 2-pin connector and the DC jack, you’re getting 10 separate ways of powering. Dual redundant power supplies would usually take your uninterrupted uptime to the next level. RB5009UPr+S+IN takes it one step above that!

All power options support a wide voltage range of 24 – 57 V. However, you can not mix the voltages. If you’re using PoE-out to power other devices, the board will choose the source with the highest voltage (DC jack or the 2-pin connector) to power those.

Each PoE-out port can supply up to 25W of power. All the ports combined are limited to 130W, which should be enough for most setups. You can specify the maximum available power from your power sources manually, if necessary. When it comes to PoE-out features, the new RB5009 can trade blows with our legendary PoE switches: CRS3xx. In the smallest possible form-factor and for the best price on the market!

Protect your uptime, protect your tranquillity!

So what exactly happens if there is a problem with one of your power sources? Here’s a quick example: you have 24V on the DC jack, 48V on the 2-pin connector, and 57V on the PoE-in. The board itself gets powered by the highest voltage input – the PoE-in. If there’s a problem, RB5009 will fall back to the second-highest voltage - the 2-pin connector. And if that fails – there’s the 24V option on the DC jack.

What about the PoE-out devices? Once again – the highest voltage wins. PoE-out devices will draw power from the 48V source on the 2-pin connector. If that fails – the 24V on the DC jack comes into play. The board will always reserve 20 watts to power itself. If there is not enough power for all the PoE-out ports, it will start disabling the ones with the lowest priority. You can set the port priority manually.

This tiny form factor shines anywhere: from confined research facilities and offices to huge corporate server rooms. And don’t forget that you can mount FOUR of these routers in a single 1U rackmount space

With the new RB5009, we want to empower all the small and medium ISPs that are always on the lookout for the most cost-effective and robust solutions. It is a perfect addition to our previous GPEN devices – a line of products designed to replace the expensive GPON solutions.

With so many powering options and a durable metallic case, the new RB5009 redefines affordable reliability.

Ethernet test results

RB5009UPr+S+IN 88F7040 all port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 811.2 9851.4 2332 9551.9 5768.4 3138
Bridging 25 bridge filter rules 811.2 9851.4 1238.3 5072.2 1235.6 672.2
Routing none (fast path) 811.2 9851.4 2332 9551.9 4969.4 2703.3
Routing 25 simple queues 811.2 9851.4 1126 4612 1095 595.7
Routing 25 ip filter rules 771.2 9365.6 755.9 3096.2 761 414
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

The device has an operating system preinstalled and licensed. No separate purchase is necessary and the product is ready to use. The device includes free software updates for the life of the product or a minimum of 5 years starting from date of purchase..

 

MikroTik
RB5009UPr+S+IN
CPU
88F7040 1.4 GHz
Product code
RB5009UPr+S+IN
Architecture
ARM 64bit
CPU core count
4
Dimensions
220 x 125 x 22 mm
Operating System
RouterOS (License level 5)
Size of RAM
1 GB
Storage size
1G
Storage type
NAND
Max Power consumption
20W
PoE in
All ports 802.3af/at
PoE out
All ports 24-57 V (PoE out)
PoE in input Voltage
24-57 V (PoE in) 24-57 V (DC jack) 24-57 (2-pin terminal)
Number of DC inputs
3
DC jack input Voltage
24V
Number of USB ports
1
USB slot type
(3.0 type A)
Max power consumption without attachments
14W
Operating Temperature
-40°C to +60°C
Current
1.5A
Certification
CE, FCC, IC
RAM type
DDR4
Number of 10G SFP+ ports
1
Number of 1G Ethernet ports
7
Number of 2.5G Ethernet ports
1
Switch chip model
88E6393
You might also like