List of products by supplier MikroTik

Private, instructor-led MikroTik Certified Traffic Control Engineer (MTCTCE) group training.Focused on packet flow, firewall, mangle, queues, and QoS using RouterOS.

The MikroTik Dynamic Routing (OSPF) Workshop is an in-depth training program focused on mastering OSPF (Open Shortest Path First) with MikroTik devices. Participants will learn to configure, monitor, and optimize OSPF routing for enhanced network performance. Topics include OSPF area configuration, route summarization, virtual links, and troubleshooting misconfigurations. Ideal for network engineers and administrators aiming to build scalable and efficient networks.

The MikroTik CRS354-48P-4S+2Q+RM is a high-density 1U rackmount dual-boot PoE switch — QCA9531 single-core MIPSBE at 650 MHz, 128 MB RAM, 32 MB flash, RouterOS v7 License 5 or SwitchOS, 48× GbE 802.3af/at PoE-out (auto-sensing + passive PoE + low voltage PoE) + 4× SFP+ 10G + 2× QSFP+ 40G, 168 Gbps non-blocking throughput, 336 Gbps switching capacity, 235 Mpps forwarding rate, 1× AC input 100–240V, 700W total PoE output, 800W max / 85W without attachments, 4 fans, RJ45 serial console, IP20, 443 × 382 × 44 mm, -20°C to +60°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes IEC cord, cable management brackets, rackmount ears, rear support ears, K-48 fastening set. Free software updates for life of product or minimum 5 years from purchase.

The MikroTik RB260GSP is a compact SOHO smart switch offering five Gigabit Ethernet ports, one SFP cage, and passive PoE output on four of its five Ethernet ports — all in a lightweight desktop plastic enclosure. Powered by the QCA8337 switch chip and running MikroTik's dedicated SwOS (SwitchOS) operating system, it delivers straightforward yet flexible Layer 2 switching management through a clean web interface. Ports 2–5 pass through passive PoE at the same voltage applied to the unit, making it simple to power compatible wireless access points, IP cameras, or small routers without the need for separate PoE injectors. 

The MikroTik CSS326-24G-2S+RM is a 1U rackmount smart switch with 24 Gigabit Ethernet ports and 2 SFP+ ports, powered by SwOS for versatile network management.

The MikroTik HGO-antenna-OUT is a dual-band outdoor screw-on antenna delivering 3.3 dBi on 2.4 GHz and 5.5–7.1 dBi on 5 GHz via RP-SMA male connectors — the official antenna upgrade for the MikroTik NetMetal ac² and any compatible RP-SMA outdoor wireless device. Adding two HGO-antenna-OUT units to a NetMetal ac² transforms it into a full dual-band outdoor access point with extended gain on both bands. Weatherproof outdoor construction. No tools required — screw on, done.

The MikroTik SXTsq 5 ac is a compact, cost-effective 5GHz CPE/Backbone device with 16dBi gain, 802.11ac support, and a Gigabit Ethernet port for high-speed links.

The MikroTik mAP lite (RBmAPL-2nD) is MikroTik's smallest wireless access point — barely larger than a matchbox at just 48 × 49 × 11 mm — yet it runs the full MikroTik RouterOS feature set on a dual-chain 2.4GHz 802.11b/g/n (Wi-Fi 4) radio. Designed for portability and versatility, it can be powered via microUSB (5 V) or 802.3af/at PoE, consumes just 3.5 W, and is equally at home as a travel router, a hotel room Wi-Fi extender, a server configuration tool, or a discreet permanent access point installation. Running RouterOS with a QCA9533 processor at 650 MHz and 64 MB of RAM, the mAP lite delivers full networking capability in the smallest possible package — ideal for technicians, travellers, and network professionals who need RouterOS in their pocket.

wAP 60G AP: A weatherproof, integrated 60 GHz Base Station with 60° beamforming antenna. Supports up to 8 simultaneous clients for indoor or outdoor Point-to-Multipoint, Point-to-Point, or CPE setups.

The MikroTik mAP (RBmAP2nD) is a tiny, full-featured 2.4GHz wireless access point that packs dual-chain 802.11b/g/n (Wi-Fi 4) wireless, two Ethernet ports, PoE output, and the complete MikroTik RouterOS feature set into an extremely compact 68 × 68 × 19 mm housing. Designed for discreet indoor installations where space is at a premium, the mAP supports three power input options — DC jack, 802.3af/at PoE, or microUSB — and can pass passive PoE through to a connected device on Ethernet port 2. Running RouterOS with a QCA9531 processor at 650 MHz and 64 MB of RAM, the mAP is well suited for hotel rooms, vehicles, small offices, or any location where a lightweight, versatile, low-power access point is needed.