List of products by supplier MikroTik

The MikroTik R11e-LR2 is a 2.4 GHz LoRa Concentrator Gateway card in mini PCIe form factor — installs in any MikroTik device with a mini PCIe slot and connected USB lines, 4 RX channels + 1 TX channel, Chirp Spread Spectrum modulation (no interference with 2.4 GHz WLAN), designed for high-density industrial IoT sensor deployments, 2W max power consumption, -40°C to +70°C operating range, MTBF ~100,000 hours at 25°C. CE, FCC, IC, RoHS certified. Compatible with RouterBOARD and other MikroTik mini PCIe hosts. USD 69.00.

The MikroTik Wireless Wire nRAY (nRAYG-60adpair) is a kit of two pre-paired 60 GHz point-to-point devices — 88F3720 dual-core ARM64 at 1 GHz per unit, 256 MB RAM, 16 MB flash, RouterOS v7 License 3, AES-encrypted wireless link, up to 2 Gbps aggregate throughput at distances up to 1,500 m, 1× GbE per unit (802.3af/at PoE-in, 12–57V), 7W max per unit, passive cooling, IP55, snow-resistant form factor, fine-tune alignment screws, 261 × 166 mm per unit, -30°C to +70°C, MTBF ~200,000 hours at 25°C. CE, FCC, IC, EAC, RoHS. Includes 2× 24V 0.38A power adapter, 2× Gigabit PoE injector, 2× nRAY solidMOUNT pole adapter, 2× nRAY aiming tool. Pre-configured — plug in and point.

The MikroTik nRayAIM-DH1 is a precision alignment and aiming attachment for the Wireless Wire nRAY 60 GHz point-to-point link — allowing installers to attach a scope of their choice directly to the nRAY for accurate beam alignment during installation. At 60 GHz, precise antenna aiming is not optional: even minor angular misalignment causes significant signal degradation. The nRayAIM-DH1 turns nRAY installation from an approximation exercise into a precision operation. It is the most cost-effective way to ensure every nRAY link is aligned correctly on the first attempt.

The MikroTik G1070 is a 500W open-frame replacement power supply unit for the MikroTik CRS328-24P-4S+RM switch — delivering dual-rail DC output at 53Vdc 8.8A and 26.5Vdc 17.6A from a universal 90–264Vac input, -10°C to +55°C tested ambient temperature, ~200,000-hour MTBF at 25°C. The correct replacement PSU to stock alongside any CRS328-24P-4S+RM deployment where power supply failure must not result in switch downtime or an emergency parts sourcing event.

The MikroTik G1270 is a 750W open-frame replacement power supply unit for the MikroTik CRS354-48P-4S+2Q+RM switch — delivering dual-rail DC output at 53Vdc 13.5A and 26.5Vdc 27A from a universal 90–264Vac input, with ~200,000-hour MTBF at 25°C. The correct replacement PSU to stock alongside any CRS354-48P-4S+2Q+RM deployment where power supply failure must not result in switch downtime or a cross-border parts sourcing delay.

The MikroTik RBGPOE-CON-HP is a rugged Gigabit PoE voltage converter that steps 48V PoE input (Passive PoE, Telecom PoE, 802.3af, or 802.3at — any 42–57V source) down to 24V Passive PoE output at up to 1A (24W) — powering any 8–30V RouterBOARD device from a 48V PoE infrastructure without a separate power adapter or injector. Two Gigabit Ethernet ports, integrated heatsink in a rugged metallic case, wall-mountable, shielded Ethernet support. The correct solution when your PoE switch delivers 48V and your RouterBOARD device needs 24V.

The MikroTik Chateau LTE12 (2025) (D53G-5HacD2HnD-TC&EG120K-EA) is the 2025 refresh of MikroTik's most accessible LTE home and office router — now with a new Quectel EG120K modem delivering expanded 4×4 MIMO across more LTE bands (B1/3/7/38/40/41), full Band 28 (700 MHz) support for rural low-band coverage, LTE Cat 12 at 600 Mbps downlink, dual-band Wi-Fi (300 Mbps on 2.4 GHz Wi-Fi 4 + 867 Mbps on 5 GHz Wi-Fi 5), 5× Gigabit Ethernet, SMA female connectors for external LTE antennas, 1× Micro SIM slot, USB Type-A with USB Power Reset, and RouterOS v7 License Level 4. The right Chateau for households and small businesses that need solid LTE internet and full RouterOS control, without paying for 5G they cannot use yet.

The MikroTik KNOT LR8G kit (RB924iR-2nD-BT5&BG770A&R11e-LR8G) is a compact, industrial-grade IoT gateway designed to bridge LoRa®-based sensor networks with cloud and enterprise infrastructure. Combining a 915 MHz LoRa® radio, LTE CAT-M1 and NB2 cellular connectivity, concurrent GPS, Bluetooth 5.2, 2.4 GHz Wi-Fi, RS485/Modbus, GPIO, and two 100 Mbps Ethernet ports with PoE-in and PoE-out — all in a passively cooled enclosure with DIN rail and wall mount support — the KNOT LR8G is purpose-built for smart asset tracking, cold chain monitoring, agricultural sensing, and industrial automation deployments. Running RouterOS v7, it offers full scripting and automation capabilities for any IoT scenario.