List of products by supplier MikroTik

The MikroTik cAP LTE12 ax is a CAT12 LTE + dual-band Wi-Fi 6 ceiling access point delivering up to 600 Mbps LTE downlink and 150 Mbps uplink — paired with 574 Mbps at 2.4 GHz and 1,200 Mbps at 5 GHz via 802.11ax, on a quad-core ARM64 IPQ-6010 CPU at 1.8 GHz with 1 GB RAM. 802.3af/at PoE-in and passive PoE-out on Ether2 (22.8W), IP20, WPA3/OWE security, CAPsMAN-ready, RouterOS v7 License 4, -40°C to +50°C. Ceiling-mount design eliminates theft, obstruction, and cable clutter from the workspace. Includes 48V adapter, Gigabit PoE injector, K-81 fastening set, and cAP ax ceiling bracket. The correct single-device LTE + Wi-Fi 6 solution for pop-up businesses, food stands, festival operations, and high-traffic temporary venues.

The MikroTik wAP LTE kit (2024 revision) is a CAT4 outdoor LTE + 2.4 GHz Wi-Fi access point delivering up to 150 Mbps downlink and 50 Mbps uplink — in a tiny IP54-weatherproof enclosure rated from -40°C to +60°C, running RouterOS v7 on License 4. Three power inputs (DC jack, passive PoE-in, automotive plug — all 9–30V), anti-vandal wall mounting, and the newly added Band 28 (700 MHz) for improved rural coverage. Includes 24V adapter, PoE injector, K-52 fastening set, K-50 locking set, wAP mount, ceiling mount bracket, desktop stand, and automotive cable.  MikroTik's own positioning: the best outdoor LTE/Wi-Fi deal on the market for tight budgets — and the 2024 modem refresh makes that claim credible.

The MikroTik LHG LTE18 kit is a CAT18 LTE outdoor router with a built-in 17 dBi high-gain grid antenna — delivering download speeds up to 1.2 Gbps and uploads up to 150 Mbps via carrier aggregation, from locations where standard routers and phones have no usable signal. Powered by 802.3af/at PoE-in (12–57V), running RouterOS v7 on a dual-core 64-bit ARM CPU at 800 MHz with 256 MB RAM, IP54-rated, and rated from -40°C to +70°C. Includes Gigabit PoE injector, 24V adapter, hose clamps, and screw kit. The correct last-mile LTE solution for remote sites, rural properties, and any location where cable or fibre infrastructure is absent.

DINrail PRO is a durable metal mounting bracket designed for the LtAP mini series. It fits standard 35 mm × 7.5 mm DIN rails, enabling seamless installation alongside industrial control equipment or in equipment racks.

The MikroTik KNOT LR8G kit is an industrial-grade multi-radio IoT gateway combining LoRa® (868 MHz), LTE CAT-M1/NB-IoT, concurrent GPS, Bluetooth 5.2, 2.4 GHz Wi-Fi (802.11b/g/n), RS485/Modbus, and dual 100 Mbps Ethernet with PoE-in and PoE-out — running full RouterOS v7 on a compact 122 × 87 × 26 mm platform at 6W idle consumption. Three power input options (DC jack 12–57V, 802.3af/at PoE-in, or 5V MicroUSB), DIN rail and wall mount hardware included, -40°C to +70°C operating range, 200,000-hour MTBF. **Canadian buyers: this is the 868 MHz LoRa® version — confirm LoRa® frequency band and LTE CAT-M1 band compatibility with Canadian carriers before ordering.**

The MikroTik 868 Omni Antenna is a 6.5 dBi, IP66-rated omni antenna for LoRa® deployments in the 862–876 MHz band — redesigned from community feedback with higher durability, improved cable durability, and full IP66 water resistance in a smaller package. Includes a 1m SMA male-to-male cable, fastening set, and mechanical holder for 25–50 mm mast or wall mounting. Rated for marine and coastal environments. The 862–876 MHz frequency range does not cover the Canadian 915 MHz LoRa® band — confirm frequency compatibility before ordering.**

The MikroTik TOF-2400-8V-4 is an 8 dBi 2.4 GHz omni antenna designed for the wAP LR2 kit — extending LoRa® gateway coverage up to 3–4 km line of sight while also supporting standard 2.4 GHz WLAN. Includes a 1-metre SMA cable for remote antenna positioning and a mechanical holder for quick mast attachment. Compact, durable, and ready to deploy out of the box. The correct external antenna upgrade for any wAP LR2 deployment where the internal antenna does not provide sufficient coverage.

The MikroTik R11e-LR2 is a 2.4 GHz LoRa Concentrator Gateway card in mini PCIe form factor — installs in any MikroTik device with a mini PCIe slot and connected USB lines, 4 RX channels + 1 TX channel, Chirp Spread Spectrum modulation (no interference with 2.4 GHz WLAN), designed for high-density industrial IoT sensor deployments, 2W max power consumption, -40°C to +70°C operating range, MTBF ~100,000 hours at 25°C. CE, FCC, IC, RoHS certified. Compatible with RouterBOARD and other MikroTik mini PCIe hosts. USD 69.00.

The MikroTik Wireless Wire nRAY (nRAYG-60adpair) is a kit of two pre-paired 60 GHz point-to-point devices — 88F3720 dual-core ARM64 at 1 GHz per unit, 256 MB RAM, 16 MB flash, RouterOS v7 License 3, AES-encrypted wireless link, up to 2 Gbps aggregate throughput at distances up to 1,500 m, 1× GbE per unit (802.3af/at PoE-in, 12–57V), 7W max per unit, passive cooling, IP55, snow-resistant form factor, fine-tune alignment screws, 261 × 166 mm per unit, -30°C to +70°C, MTBF ~200,000 hours at 25°C. CE, FCC, IC, EAC, RoHS. Includes 2× 24V 0.38A power adapter, 2× Gigabit PoE injector, 2× nRAY solidMOUNT pole adapter, 2× nRAY aiming tool. Pre-configured — plug in and point.

The MikroTik nRayAIM-DH1 is a precision alignment and aiming attachment for the Wireless Wire nRAY 60 GHz point-to-point link — allowing installers to attach a scope of their choice directly to the nRAY for accurate beam alignment during installation. At 60 GHz, precise antenna aiming is not optional: even minor angular misalignment causes significant signal degradation. The nRayAIM-DH1 turns nRAY installation from an approximation exercise into a precision operation. It is the most cost-effective way to ensure every nRAY link is aligned correctly on the first attempt.