List of products by supplier MikroTik

The MikroTik CCR2004-16G-2S+ is a powerful 1U rack-mount router built on the Annapurna Labs AL32400 quad-core ARM64 processor running at 1700 MHz with 4 GB of RAM, making it the strongest single-core performer in the CCR2004 series. It provides 16× Gigabit Ethernet ports and 2× 10G SFP+ ports, runs RouterOS v7 with a Level 6 licence, and features dual hot-swap PSU slots accepting 100–240 V AC — giving it full power redundancy for mission-critical deployments. With IPsec hardware acceleration reaching up to 2.6 Gbps and routing throughput of up to 35 Gbps at 1518-byte frames, it is suited to ISPs, enterprise networks, and data centres requiring a high-performance, versatile router at an accessible price point.

The MikroTik RB5009UG+S+IN is a compact quad-core desktop router — Marvell Armada 88F7040 ARMv8 at 350–1,400 MHz (auto), Marvell Amethyst 88E6393 switch chip, 1 GB DDR4 RAM, 1 GB NAND storage, RouterOS v7 License 5, 7× GbE + 1× 2.5G Ethernet + 1× SFP+ 10G (all connected to switch chip via 10 Gbps full-duplex line to CPU), USB 3.0 type A (1.5A), 3× power inputs (PoE-in 802.3af/at, DC jack 24–57V, 2-pin terminal 24–57V), passive cooling (case as heatsink), CPU temperature monitor, 220 × 125 × 22 mm, -40°C to +60°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes K-55 screw kit + 24V 1.5A power adapter. USD 219.00.

The K-65 rackmount ears are designed specifically for the RB4011 series, enabling seamless installation of units in standard rack setups.

The MikroTik MTP250-26V94-OD is an outdoor AC/DC power supply unit — 26V DC output, 250W, IP67 (fully dust-tight + immersion rated), designed for the MikroTik netPower outdoor switch product line and 12–30V outdoor access points and devices, pole/wall mount compatible, sturdy sealed enclosure, -40°C to +70°C operating range, MTBF ~100,000 hours at 25°C. Companion variant: MTP250-53V47-OD (53V 250W for higher-voltage devices such as PTZ cameras). CE, EAC, RoHS certified. No RouterOS — standalone power supply unit. USD 99.00.

The MikroTik K-79 is a rackmount bracket kit for RB5009UG+S+IN and L009UiGS-2HaxD-IN routers — mounts up to 4× RB5009 or L009 devices side-by-side in a single standard 1U rack space. Compatible with any standard 19" rack or the MikroTik SR-10U desktop rack (40 RB5009 total in 10U). Passive mechanical bracket — no electronics, no firmware, no certification required. MTBF ~100,000 hours at 25°C. Includes all hardware needed for installation. USD 7.00.

The MikroTik CCR2116-12G-4S+ is a 1U rack-mount ISP edge router — Amazon Annapurna Labs AL73400 16-core ARM64 at 2,000 MHz, Marvell Aldrin 98DX3255 switch chip (L3 hardware offloading, 4× 10G CPU lines), 16 GB DDR4 RAM, 128 MB NAND, 1× M.2 PCIe slot, RouterOS v7 License 6, 12× GbE (switch chip) + 1× GbE (direct CPU management), 4× SFP+ (10G), RJ45 serial console, 2× AC PSU (100–240V, 47–63 Hz), 4 fans, 83W max / 60W without attachments, CPU + PCB + voltage monitors, mode button, 443 × 199 × 44 mm, -20°C to +60°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes 2× IEC cord, rack bracket, K-57 kit. USD 995.00.

The MikroTik CCR2216-1G-12XS-2XQ is MikroTik's flagship cloud core router — Amazon Annapurna Labs AL73400 16-core ARM64 at 2,000 MHz, Marvell Prestera Aldrin2 98DX8525 switch chip (L3 hardware offloading, 4× 25G CPU lines), 16 GB DDR4 RAM, 128 MB NAND, 2× M.2 SATA slots, RouterOS v7 License 6, 12× SFP28 (25G), 2× QSFP28 (100G), 1× GbE, RJ45 serial console, 2× hot-swap AC PSU (100–240V, 50–60 Hz), 4× hot-swap fans, 128W max / 80W without attachments, CPU + PCB + voltage monitors, IP20, -20°C to +60°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes 2× IEC cord, rack ears, cable management brackets, K-82 fastening set. USD 2,795.00.

The MikroTik UP1302C-12 is a 12 V 10.8 A internal replacement power supply unit designed for use in the CCR1036 series routers and the CRS326-24S+2Q+RM switch. It is compatible specifically with r2 revisions of CCR1036 devices — those featuring a screw terminal connector — and provides a direct internal power source for these platforms. It is the appropriate spare or replacement PSU for operators maintaining CCR1036 or CRS326-24S+2Q+RM installations.

The MikroTik CCR2004-1G-2XS-PCIe is a unique PCIe network interface card that embeds a complete, fully licensed RouterOS router directly inside a server. Installed into a standard PCIe slot, it presents itself to the host as a network interface while simultaneously running RouterOS v7 on its own dedicated quad-core ARM64 AL52400 processor running at 1500 MHz with 4 GB of RAM. The card provides 1× Gigabit Ethernet and 2× 25G SFP28 ports, and can operate in two modes: a standard RouterOS mode for full routing, firewall, and VPN functionality, or a Passthrough mode for near-transparent, wire-speed bridging at up to 100 Gbps with Jumbo frames. Supported on Linux hosts and RouterOS hosts, it is aimed for those who want to add powerful router capabilities to an existing server.

The MikroTik CRS310-1G-5S-4S+IN is a 1U rack-mount fibre switch — Marvell 98DX226S dual-core ARM 32bit switch chip at 800 MHz (CPU + switch ASIC combined), 256 MB RAM, 16 MB FLASH, RouterOS v7 / SwitchOS dual boot, License 5, 5× SFP (1G), 4× SFP+ (10G), 1× GbE (direct switch chip connection), RJ45 serial console, 2× DC inputs (DC jack 18–57V + 802.3af/at PoE-in 18–57V), 1 fan, 20W max / 8W without attachments, CPU + PCB + voltage monitors, IP20, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes K-48 fastening set, rack ears, 24V 1.2A adapter. USD 199.00.