25G & 10G AI Networking
There are 36 products.
MikroTik XS+DA0003 Tri-Rate 1G/10G/25G SFP28 DAC Cable 3m for CCR2004 and SFP28 Devices
Available!
The XS+DA0003 is a 3-meter direct attach cable supporting SFP 1G, SFP+ 10G, and SFP28 25G standards. It provides an affordable, low-latency solution for connecting devices within or across adjacent racks for high-speed networking.
US$39.00
SYNOXX 10G SFP+ LR Transceiver ESP31X-20D LC 1310nm 20km
In stock
The SYNOXX ESP31X-20D is a 10G SFP+ LR optical transceiver delivering 10Gbps data
transmission over single-mode fiber (SMF) up to 20km using a 1310nm DFB laser
transmitter and PIN photodetector receiver. Supports Digital Diagnostic Monitoring
(DDM) for real-time parameter tracking, with under 1W power consumption, LC duplex
connector, and compliance with SFF-8431, SFF-8432, SFF-8472, and IEEE 802.3ae
standards. Hot-pluggable, RoHS compliant, and IC Certified for Canada and the US.
transmission over single-mode fiber (SMF) up to 20km using a 1310nm DFB laser
transmitter and PIN photodetector receiver. Supports Digital Diagnostic Monitoring
(DDM) for real-time parameter tracking, with under 1W power consumption, LC duplex
connector, and compliance with SFF-8431, SFF-8432, SFF-8472, and IEEE 802.3ae
standards. Hot-pluggable, RoHS compliant, and IC Certified for Canada and the US.
US$35.00
SYNOXX 25G SFP28 DAC Cable EDSP2X-1 SFP28 1m
In stock
The SYNOXX EDSP2X-1 is a 25G SFP28 to SFP28 passive direct attach copper (DAC)
cable delivering 25.78Gbps over a 1-metre twinax connection — the standard
same-rack interconnect for 25G leaf-to-server links, high-density SFP28 switch
stacking, and 100G breakout target deployments where short-reach passive copper
outperforms active optics on cost and power. Compliant with SFP28 MSA, SFF-8402,
and IEEE 802.3by, featuring a hot-pluggable SFP28 form factor, low power consumption,
and low-latency passive copper signal path with no active components required.
Hot-pluggable, RoHS compliant, and IC Certified.
cable delivering 25.78Gbps over a 1-metre twinax connection — the standard
same-rack interconnect for 25G leaf-to-server links, high-density SFP28 switch
stacking, and 100G breakout target deployments where short-reach passive copper
outperforms active optics on cost and power. Compliant with SFP28 MSA, SFF-8402,
and IEEE 802.3by, featuring a hot-pluggable SFP28 form factor, low power consumption,
and low-latency passive copper signal path with no active components required.
Hot-pluggable, RoHS compliant, and IC Certified.
US$30.00
MikroTik XS+DA0001 Tri-Rate 1G/10G/25G SFP/SFP+/SFP28 Direct Attach Cable (DAC) 1m
Available!
The MikroTik XS+DA0001 is a 1-metre tri-rate Direct Attach Cable (DAC) that supports 1G SFP, 10G SFP+, and 25G SFP28 interfaces in a single cable — offering greater flexibility and value compared to single-rate DAC alternatives. It provides a low-cost, low-power, and low-latency copper interconnect solution for short-distance connections within a rack or between adjacent racks. Fully compliant with SFP+ MSA specifications and supporting 25-Gigabit Ethernet and Fibre Channel standards, it is an ideal choice for high-density data centre and server room cabling where SFP, SFP+, or SFP28 ports need to be directly connected. A 3-metre version is also available as the XS+DA0003.
US$29.00
SYNOXX 10G SFP+ DAC Cable EDSPX-5-24 SFP+ 5m
In stock
The SYNOXX EDSPX-5-24 is a 10G SFP+ to SFP+ passive direct attach copper (DAC)
cable delivering 10Gbps — and backward-compatible 1Gbps — over a 5-metre 24AWG
twinax connection, purpose-built for extended-rack and end-of-row 10G deployments
where 1m and 3m cables fall short, including cross-rack ToR switch-to-server links,
long overhead tray runs, and flexible 10G fabric connections requiring extra passive
copper reach. Compliant with SFP+ MSA, SFF-8431, and SFF-8432 standards, with
power consumption below 0.2W per end, hot-pluggable SFP+ form factor, and
operating temperature range of 0°C to 70°C. Hot-pluggable, RoHS compliant, and
IC Certified.
cable delivering 10Gbps — and backward-compatible 1Gbps — over a 5-metre 24AWG
twinax connection, purpose-built for extended-rack and end-of-row 10G deployments
where 1m and 3m cables fall short, including cross-rack ToR switch-to-server links,
long overhead tray runs, and flexible 10G fabric connections requiring extra passive
copper reach. Compliant with SFP+ MSA, SFF-8431, and SFF-8432 standards, with
power consumption below 0.2W per end, hot-pluggable SFP+ form factor, and
operating temperature range of 0°C to 70°C. Hot-pluggable, RoHS compliant, and
IC Certified.
US$27.00
SYNOXX 10G SFP+ SR Transceiver ESP85X-03D LC 300m
In stock
The SYNOXX ESP85X-03D is a 10G SFP+ SR optical transceiver delivering 10Gbps
transmission over multimode fiber (MMF) up to 300m using an 850nm VCSEL transmitter
and PIN photodetector — purpose-built for high-density, short-range data centre and
enterprise fiber links. Supports data rates up to 10Gbps with Digital Diagnostic
Monitoring (DDM), all-metal housing for EMI protection, and compliance with IEEE
802.3ae and SFF-8431 standards, with power consumption under 1W. Hot-pluggable,
RoHS compliant, and IC Certified.
transmission over multimode fiber (MMF) up to 300m using an 850nm VCSEL transmitter
and PIN photodetector — purpose-built for high-density, short-range data centre and
enterprise fiber links. Supports data rates up to 10Gbps with Digital Diagnostic
Monitoring (DDM), all-metal housing for EMI protection, and compliance with IEEE
802.3ae and SFF-8431 standards, with power consumption under 1W. Hot-pluggable,
RoHS compliant, and IC Certified.
US$25.00
SYNOXX 10G SFP+ DAC Cable EDSPX-3 SFP+ 3m
In stock
The SYNOXX EDSPX-3 is a 10G SFP+ to SFP+ passive direct attach copper (DAC) cable
delivering 10Gb/s data transfers over a 3-metre twinax connection. Supports 10G and
1G data rates with under 0.2W power consumption per end on standard SFP+ MSA,
SFF-8431, and SFF-8432 compliant equipment. Hot-pluggable, RoHS compliant, and
IC Certified for Canada and the US.
delivering 10Gb/s data transfers over a 3-metre twinax connection. Supports 10G and
1G data rates with under 0.2W power consumption per end on standard SFP+ MSA,
SFF-8431, and SFF-8432 compliant equipment. Hot-pluggable, RoHS compliant, and
IC Certified for Canada and the US.
US$22.00
SYNOXX 10G SFP+ DAC Cable EDSPX-1 SFP+ 1m
In stock
The SYNOXX EDSPX-1 is a 10G SFP+ to SFP+ passive direct attach copper (DAC) cable
delivering 10Gb/s data transfers over a 1-metre twinax connection — the ideal
same-rack interconnect for high-density switching environments. Supports 10G and 1G
data rates with under 0.2W power consumption per end, compliant with SFP+ MSA,
SFF-8431, and SFF-8432 standards. Hot-pluggable, RoHS compliant, and IC Certified
for Canada and the US.
delivering 10Gb/s data transfers over a 1-metre twinax connection — the ideal
same-rack interconnect for high-density switching environments. Supports 10G and 1G
data rates with under 0.2W power consumption per end, compliant with SFP+ MSA,
SFF-8431, and SFF-8432 standards. Hot-pluggable, RoHS compliant, and IC Certified
for Canada and the US.
US$17.00
MikroTik CCR2116-12G-4S+ 16-Core 10G ISP Edge Router
Product available for back-orders
The MikroTik CCR2116-12G-4S+ is a 1U rack-mount ISP edge router — Amazon Annapurna Labs AL73400 16-core ARM64 at 2,000 MHz, Marvell Aldrin 98DX3255 switch chip (L3 hardware offloading, 4× 10G CPU lines), 16 GB DDR4 RAM, 128 MB NAND, 1× M.2 PCIe slot, RouterOS v7 License 6, 12× GbE (switch chip) + 1× GbE (direct CPU management), 4× SFP+ (10G), RJ45 serial console, 2× AC PSU (100–240V, 47–63 Hz), 4 fans, 83W max / 60W without attachments, CPU + PCB + voltage monitors, mode button, 443 × 199 × 44 mm, -20°C to +60°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes 2× IEC cord, rack bracket, K-57 kit. USD 995.00.
US$995.00
MikroTik CCR2004-16G-2S+ Quad-Core 10G RouterOS L6
Product available for back-orders
The MikroTik CCR2004-16G-2S+ is a powerful 1U rack-mount router built on the Annapurna Labs AL32400 quad-core ARM64 processor running at 1700 MHz with 4 GB of RAM, making it the strongest single-core performer in the CCR2004 series. It provides 16× Gigabit Ethernet ports and 2× 10G SFP+ ports, runs RouterOS v7 with a Level 6 licence, and features dual hot-swap PSU slots accepting 100–240 V AC — giving it full power redundancy for mission-critical deployments. With IPsec hardware acceleration reaching up to 2.6 Gbps and routing throughput of up to 35 Gbps at 1518-byte frames, it is suited to ISPs, enterprise networks, and data centres requiring a high-performance, versatile router at an accessible price point.
US$465.00