List of products by supplier MikroTik

The ACSMAUFL is a U.fl to SMA female pigtail designed to connect modems (LTE, LoRa, or wireless cards) with U.fl connectors to external antennas for enhanced signal quality.

The MikroTik Wireless Wire (RBwAPG-60adkit) is a complete point-to-point wireless kit that replaces a Gigabit Ethernet cable with a 60 GHz radio link — delivering 1 Gbps full duplex throughput for distances of up to 200 metres. The kit includes two wAP 60G devices that are pre-paired at the factory, so installation is as simple as pointing the two units at each other and powering them on. The 60 GHz link operates outside the congested 2.4 GHz and 5 GHz Wi-Fi spectrum, providing a stable, interference-free connection secured with AES encryption. Each unit runs RouterOS Level 3 on a quad-core ARM processor, is PoE-powered, rated IP55, and rated for outdoor operation from -40°C to +70°C. 

The MikroTik RB5009UPr+S+IN is a high-availability PoE-out router — quad-core ARM64 Marvell 88F7040 at 350–1400 MHz, Marvell 88E6393 switch chip, 1 GB RAM, 1 GB NAND, RouterOS v7 License 5, 7× Gigabit Ethernet (PoE-in reverse Mode B + PoE-out 802.3af/at), 1× 2.5G Ethernet (PoE-in 802.3af/at + PoE-out), 1× SFP+ (10G), USB 3.0, 3 DC inputs (DC jack + PoE-in + 2-pin terminal, all 24–57V), 130W total PoE-out budget (25W per port max), 150W max / 16W without attachments, passive cooling, IP20, -40°C to +60°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes 48V 2A adapter, IEC cord, K-55 screw kit, connector plug. USD 299.00.

The MikroTik CRS518-16XS-2XQ-RM is an enterprise-grade 1U rack-mount switch delivering 16× 25 Gigabit SFP28 ports and 2× 100 Gigabit QSFP28 ports, all driven by the Marvell Prestera Aldrin2 (98DX8525) switch chip with a non-blocking switching fabric of up to 1.2 Tbps. The 25G SFP28 ports are fully backward compatible with 10G and 1G SFP devices. Dual hot-swap power supplies with a 100–240 V AC input range and four active cooling fans ensure reliable operation in demanding data centre and enterprise deployments. Running RouterOS v7 with a Level 6 licence, it supports VLAN (802.1Q, 802.1ad), L3 hardware offloaded routing, ACL, LACP, MLAG, and Jumbo frames — making it a powerful and cost-effective core or aggregation switch for high-density 25G and 100G networks.

The MikroTik CSS610-8P-2S+IN is a compact managed PoE switch — Marvell 88E6193X switch ASIC, 64 KB FLASH, SwitchOS Lite, 8× Gigabit Ethernet with 802.3af/at + passive PoE-out (140W total budget, 1000 mA low-voltage / 625 mA high-voltage per port), 2× SFP+ (10G), AC input 100–240V + DC jack 48–57V, 162W max / 12W without attachments, passive cooling, IP20, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes rack ears, K-48 fastening set, IEC cord. USD 229.00. Browser-configurable managed PoE switch for home, SMB, hotel, call centre, and IP camera deployments.

S-85DLC05D is a 1.25G SFP transceiver featuring an 850nm Dual LC connector for up to 550 meters of Multi Mode fiber connectivity, complete with DDM (Digital Diagnostics Monitoring) support.

The MikroTik hAP ax² is a powerful dual-band Wi-Fi 6 home access point and router, representing the next generation of the widely popular hAP ac² platform. It delivers AX1800 wireless speeds — up to 1200 Mbps on 5 GHz and 574 Mbps on 2.4 GHz — via a dual-chain 802.11ax radio on each band, powered by a Qualcomm IPQ-6010 quad-core ARM64 CPU running at 864 MHz with 1 GB of RAM. The unit features five Gigabit Ethernet ports, passive PoE-in and PoE-out on Ether 1, runs RouterOS v7 with a Level 4 licence, and supports IPsec hardware encryption. It can be mounted vertically, horizontally, or on the wall using the included accessories, making it an excellent all-in-one solution for home users, small offices, and network enthusiasts.

The S-31DLC20D is a 1.25G SFP transceiver with a 1310nm Dual LC connector, designed for Single Mode fiber connections up to 20 km. It features DDM support and compatibility with a wide range of MikroTik and non-MikroTik devices.

The MikroTik netPower 16P (CRS318-16P-2S+OUT) is a compact outdoor 18-port dual-boot PoE switch — 98DX226S dual-core ARM 32-bit at 800 MHz, 256 MB RAM, 16 MB flash, RouterOS v7 License 5 or SwitchOS, 16× GbE 802.3af/at PoE-out (Ether1–16) + 2× SFP+ 10G, 36 Gbps non-blocking throughput, 72 Gbps switching capacity, 53.6 Mpps forwarding rate, dual DC jack input (18–30V or 48–57V), 316W max / 16W without attachments, no onboard voltage converter, passive cooling, IP54, 303 × 212 × 78 mm, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes K-66 fastening set, 2× hose clamps, 2× DC to terminal block adapters. Power supply NOT included.

The MikroTik XS+DA0001 is a 1-metre tri-rate Direct Attach Cable (DAC) that supports 1G SFP, 10G SFP+, and 25G SFP28 interfaces in a single cable — offering greater flexibility and value compared to single-rate DAC alternatives. It provides a low-cost, low-power, and low-latency copper interconnect solution for short-distance connections within a rack or between adjacent racks. Fully compliant with SFP+ MSA specifications and supporting 25-Gigabit Ethernet and Fibre Channel standards, it is an ideal choice for high-density data centre and server room cabling where SFP, SFP+, or SFP28 ports need to be directly connected. A 3-metre version is also available as the XS+DA0003.