List of products by supplier MikroTik

PWR-LINE US is a Type A power adapter with built-in PWR-LINE functionality, designed for microUSB-powered MikroTik routers like the hAP mini or hAP lite. It eliminates the need for LAN cables by creating a seamless connection between PWR-LINE compatible devices over your existing electrical wiring.

The MikroTik KNOT (RB924i-2nD-BT5&BG77) is a universal IoT gateway — QCA9531 single-core MIPSBE at 650 MHz, 64 MB RAM, 128 MB NAND, RouterOS v7 License 4, NB-IoT/CAT-M cellular modem (Nano SIM), 2.4 GHz 802.11b/g/n Wi-Fi 4 (300 Mbps, 1.5 dBi), Bluetooth 5.2 (uUFL connector), GPS (SMA female), RS485 serial console, 2× 100 Mbps Ethernet (PoE-in 802.3af/at on Ether1, passive PoE-out up to 57V 12W on Ether2), microUSB, DIN rail mount + K-47 wall mount included, IP20, passive cooling, 122 × 87 × 26 mm, -40°C to +70°C, MTBF ~100,000 hours at 25°C. CE, FCC, IC, EAC, RoHS. Includes 24V 1.2A adapter, K-47 wall mount, USB OTG cable, DIN rail mount. USD 99.00.

TG-BT5-IN: Compact indoor Bluetooth tags designed for proximity-based IoT tracking. Perfect for asset tracking in warehouses, construction sites, and other indoor environments. Features iBeacon, Eddystone, and MikroTik telemetrysupport.

The MikroTik GESP+POE-IN is a passive PoE injector with built-in surge protection — injects passive PoE power to mast-mounted antennas and access points while protecting downstream switches from lightning strikes and static build-up on outdoor cable runs. Designed as the ground-level companion to the GESP surge protector (mounted at the top of the mast) — together forming a dual-end surge protection system for outdoor deployments. Passive device — no RouterOS, no firmware, no configuration. Includes K-73 fastening set. Recommended attachment: PVC zip ties. USD 12.00.

The MikroTik MTP250-53V47-OD is an outdoor-rated AC/DC power supply unit designed to provide centralised 53 V power for MikroTik's netPower product line and other outdoor devices requiring higher-voltage DC power. Delivering up to 250 W at 53 V (approximately 4.7 A), it is housed in a rugged IP67-rated enclosure that provides full protection against dust ingress and immersion, making it suitable for demanding pole or wall-mount outdoor installations. It is the higher-voltage companion to the MTP250-26V94-OD (26 V / 250 W), and the appropriate choice for setups such as networks of PTZ security cameras or other outdoor equipment that requires a higher DC supply voltage. Two hose clamps are included for pole mounting. Certifications include CE, EAC, and RoHS.

The MikroTik G1483-0600WNB is a 600W hot-swap replacement or expansion power supply unit designed exclusively for the CRS320-8P-8B-4S+RM PoE++ switch. The CRS320 ships with a single 600W PSU as standard, and includes an expansion slot for a second PSU — adding this unit raises the total combined power output to 1150W, enabling up to 90W per PoE++ port. As a hot-swap unit, it can be installed or replaced without powering down the switch, making it ideal for environments where uptime cannot be compromised.

The MikroTik XQ+CM0000-XS+ is a QSFP28 to SFP28 form-factor converter — a passive adapter that allows any SFP / SFP+ / SFP28 module (1G / 10G / 25G) to be inserted into a QSFP28 100G/40G port, enabling the use of existing SFP28 transceivers and DAC cables in QSFP28 port-equipped switches without a separate SFP28 switch layer. Tested ambient temperature -20°C to +85°C, MTBF ~100,000 hours at 25°C. No certifications published. The correct port-conversion accessory for CRS504-4XQ-IN, CRS518-16XS-2XQ-RM, CRS510-8XS-2XQ-IN, and any MikroTik or third-party switch with QSFP28 ports where existing SFP28 25G, SFP+ 10G, or SFP 1G modules need to be utilised without rewiring or adding a downstream switch.

The RBPOE is a cost-effective passive PoE injector designed for powering 10/100Mbps RouterBOARD devices. It simplifies installations by reducing the number of cables required.

These 9 micron (OS2) fiber optic cable is made with Corning ClearCurve LBL glass fiber, which exceeds ITU-T G.657.A2/B2 and remains compatible and fully compliant with ITU-T G.652.D. It has 3mm jacket and rated low smoke zero halogen (LSZH) & riser (OFNR). They are tested to provide the optimum data transmission and network stability. They are used for connections to data center, CATV, fiber test equipment, LAN, telecommunication networks, FTTx, communication rooms and fiber optic communication system.

The MikroTik CADDY is a 10-pack of replacement NVMe drive tray inserts purpose-built for the MikroTik ROSE Data server (RDS). Each tray provides quick, secure NVMe drive mounting within the RDS chassis — allowing drives to be installed, swapped, or replaced cleanly without improvised mounting solutions. For a pack of 10, the CADDY is the essential on-site spare for any ROSE Data server deployment where NVMe drives are added, replaced, or rotated over the server's operational life.