Hardware

The R11e-2HPnD is a high-power 2 GHz miniPCIe wireless card, designed for efficient and reliable networking in the 802.11b/g/n spectrum. Perfectly suited for MikroTik RB912 series, RB800, and miniPCIe adapters like RB14e/RB14eU, this card offers excellent performance for various custom and professional setups.

TG-LR82 is a compact LoRaWAN multi-sensor device with temperature, humidity, motion, and event detection, designed for long-range IoT monitoring with low power consumption and flexible automation.

The MikroTik MT-HotSwapFan-V2 is a hot-swappable replacement fan module designed exclusively for the CRS804 DDQ switch. It allows a failed or aging fan to be replaced without powering down the switch, eliminating downtime in environments where continuous operation is critical. Ideal for AI clusters, storage networks, and high-speed backbone deployments where sustained airflow and cooling reliability cannot be compromised.

The RB4011 Wall Mount Kit is a secure mounting solution designed to protect your RB4011 router and its Ethernet ports in public or high-traffic areas, preventing unauthorized access and accidental disconnections.

CCR3232-16XG-4DS-2DQ is a high-performance Cloud Core Router powered by Ampere CPUs, offering 200G/400G connectivity, advanced routing features, and scalable performance for modern data center and ISP networks.

The MikroTik Chateau LTE18 ax is the Generation 6 flagship home and office LTE router — CAT18 LTE delivering up to 1.2 Gbps downlink with 4×4 MIMO, dual-band Wi-Fi 6 (574 Mbps at 2.4 GHz, 1,200 Mbps at 5 GHz), four Gigabit Ethernet ports plus a 2.5 Gigabit Ethernet port, 4 built-in LTE antennas with 2 optional external antenna ports, quad-core ARM64 IPQ-6010 at 1.8 GHz, 1 GB RAM, WPA3, USB-A, RouterOS v7 License 4, -40°C to +65°C. Single DC jack input (12–28V), passive cooling, 19W max, 240 × 156 × 44 mm. Includes 24V 1.2A adapter and 1.5m UTP flat cable. USD 299.00. The complete LTE home router for households and small offices replacing fixed broadband with a single, elegant device.

The MikroTik Wireless Wire nRAY (nRAYG-60adpair) is a kit of two pre-paired 60 GHz point-to-point devices — 88F3720 dual-core ARM64 at 1 GHz per unit, 256 MB RAM, 16 MB flash, RouterOS v7 License 3, AES-encrypted wireless link, up to 2 Gbps aggregate throughput at distances up to 1,500 m, 1× GbE per unit (802.3af/at PoE-in, 12–57V), 7W max per unit, passive cooling, IP55, snow-resistant form factor, fine-tune alignment screws, 261 × 166 mm per unit, -30°C to +70°C, MTBF ~200,000 hours at 25°C. CE, FCC, IC, EAC, RoHS. Includes 2× 24V 0.38A power adapter, 2× Gigabit PoE injector, 2× nRAY solidMOUNT pole adapter, 2× nRAY aiming tool. Pre-configured — plug in and point.

Wireless Wire Dish: Achieve 2 Gbps aggregate speeds over a distance of up to 1.5 km! A revolutionary 60 GHz wireless solution offering fiber-like quality and stability at a fraction of the cost.

The MikroTik LHG LTE18 kit is a CAT18 LTE outdoor router with a built-in 17 dBi high-gain grid antenna — delivering download speeds up to 1.2 Gbps and uploads up to 150 Mbps via carrier aggregation, from locations where standard routers and phones have no usable signal. Powered by 802.3af/at PoE-in (12–57V), running RouterOS v7 on a dual-core 64-bit ARM CPU at 800 MHz with 256 MB RAM, IP54-rated, and rated from -40°C to +70°C. Includes Gigabit PoE injector, 24V adapter, hose clamps, and screw kit. USD 279.00. The correct last-mile LTE solution for remote sites, rural properties, and any location where cable or fibre infrastructure is absent.

The MikroTik ATL LTE18 kit (ATLGM&EG18-EA) is a directional outdoor LTE Cat18 router — dual-core ARM64 Marvell 88F3720 at 800 MHz, 256 MB RAM, 16 MB FLASH, RouterOS v7 License 3, LTE Cat18 1.2 Gbps DL / 150 Mbps UL, 4×4 MIMO DL / 1×1 UL, FDD bands 1/3/5/7/8/20/28 + TDD bands 38/40/41, 3G R8, 1× Micro SIM, 1× M.2 slot, 4× high-gain mid-band antennas (1.7–2.7 GHz) + 2× high-gain low-band antennas (700MHz–1GHz, Band 28), 1× Gigabit Ethernet PoE-in 802.3af/at 12–57V, passive cooling, IP54, -40°C to +70°C, MTBF ~200,000 hours. CE, EAC, RoHS — no FCC, no IC. Includes 24V 0.8A adapter, Gigabit PoE injector, hose clamp ×2. USD 279.00.