CRS504-4XQ-IN
zoom_out_map
chevron_left chevron_right
-5%

CRS504-4XQ-IN

Your most affordable, compact, energy-efficient doorway to the world of 100 Gigabit networking. This switch is the next step in upgrading existing 10 or 25 Gigabit networks. Multiple powering options, dual hot-swap power supplies.

US$759.05

US$759.05 Tax excluded

US$799.00 -5%

Be sure to check availability date
check Check for the availability!
US/Canada
We only offer IC Certified products. For international products, contact us.
Please note!
Ship Charge Will Display As Free Until Ship Address / Location Is Provided To Calculate Ship Charge.

Our 100 Gigabit family keeps expanding – you’ve already seen the incredible CCR2216 100 Gigabit router. Now it’s time for a matching switch – the CRS504-4XQ-IN. The small size combined with the low power consumption (25W without attachments!) is perfect to start expanding 100 Gigabit networking in everyday setups. This speed is no longer limited to data centers, ISPs, and large offices. You too can upgrade your 10 or 25 Gigabit network and join the one hundred club!

There are four 100 Gigabit QSFP28 ports. Use them to connect other 100 Gigabit devices or grab a breakout cable to connect multiple 25 Gigabit devices: each port is connected to four 25 Gigabit lines, allowing you to connect 16 x 25 Gigabit devices. In fact, you can mix and match all kinds of connections this way: 100 Gigabits on one port, 40 Gigabits on the other, 4x25 Gigabits on the third, and maybe even some 10G or 1G cables on the fourth. The mighty Marvell DX4310 switch-chip will handle everything without breaking a sweat!

Obviously, there is an Ethernet port for management purposes as well.

We’ve been using this switch for quite some time now in the Genomics Data Network project. A high-capacity data network for our local scientists working on ground-breaking cancer treatments. Genome data can take up a lot of space, so you need exceptionally fast connections there. Also, with these devices, Latvia became the first Baltic country to establish a 100 Gigabit connection to the pan-European research network.

With multiple powering options and the ability to be mounted on the wall, this switch will make any system administrator happy.

Switching results

CRS504-4XQ-IN
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Switching Non blocking Layer 2 throughput 32,517.9 394,897.1 94,008.5 385,058.6 595,386.9 304,838.1
Switching Non blocking Layer 2 capacity 32,517.9 789,794.3 94,008.5 770,117.3 595,386.9 609,676.2
Switching Non blocking Layer 1 throughput 32,517.9 400,100.0 94,008.5 400,100.0 595,386.9 400,100.0
Switching Non blocking Layer 1 capacity 32,517.9 800,200.0 94,008.5 800,200.0 595,386.9 800,200.0

Ethernet test results

CRS504-4XQ-IN QCA9531 all port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 37,4 454.2 82,8 339.1 162,5 83.2
Bridging 25 bridge filter rules 33,8 410.5 47,8 195.8 75,6 38.7
Routing none (fast path) 37,2 451.8 73,3 300.2 144,9 74.2
Routing 25 simple queues 36,4 442.0 52,4 214.6 54,4 27.9
Routing 25 ip filter rules 33,8 410.5 41,4 169.6 41,7 21.4
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

The device has an operating system preinstalled and licensed. No separate purchase is necessary and the product is ready to use. The device includes free software updates for the life of the product or a minimum of 5 years starting from date of purchase..

 

MikroTik
CRS504-4XQ-IN
5 Items
10/100 Ethernet ports
1
CPU
QCA9531
LICENSE
RouterOS L4
Product code
CRS504-4XQ-IN
Architecture
MIPSBE
CPU core count
1
CPU nominal frequency
650 MHz
Dimensions
320 x 185 x 44 mm
Size of RAM
64 MB
Storage size
16 MB
Storage type
FLASH
Tested ambient temperature
-40°C to 70°C
Max Power consumption
41 W
PoE in
802.3 bt
PoE in input Voltage
43-57 V
Number of AC inputs
2
Number of DC inputs
3 (DC jack, PoE-IN, 2-pin terminal)
AC input range
100-240
2-pin terminal input Voltage
36-57 V
DC jack input Voltage
36-57 V
Serial port
RJ45
CPU temperature monitor
Yes
Voltage Monitor
Yes
PCB temperature monitor
Yes
Max power consumption without attachments
25 W
Frequency Range
47-63Hz
Certification
CE, EAC, ROHS
MTBF
Approximately 200'000 hours at 25C
Number of 100G QSFP28 ports
4
Cooling type
2 fans