New Releases

The MikroTik CRS804 DDQ (CRS804-4DDQ-hRM) is a compact 1U 400G switch built for AI clusters, storage fabrics, and high-speed aggregation. It features four 400G QSFP56-DD ports with flexible breakout down to 1G, dual 1G/10G Ethernet, a Marvell 98DX7335 switch chip, quad-core 2 GHz ARM CPU, 4 GB DDR4 RAM, dual hot-swap redundant power supplies, and two hot-swap cooling fans — all at 123W max power consumption. Runs RouterOS v7 with License Level 6.

The MikroTik CRS812 DDQ (CRS812-8DS-2DQ-2DDQ-RM) is a high-performance 1U rackmount aggregation switch that brings 50G, 200G, and 400G connectivity to data centres, campus cores, and service provider networks at an accessible price point. Powered by a Marvell 98DX7335 switch chip and a quad-core 2 GHz ARM64 CPU with 4 GB of RAM, it features eight 50G SFP56 ports, two 200G QSFP56 ports, two 400G QSFP56-DD ports, and two 1G/10G Ethernet ports — with full QSFP56/QSFP-DD breakout support down to 1G/2.5G/5G/10G/25G/50G. Equipped with dual hot-swap redundant power supplies, four hot-swap cooling fans, and RouterOS v7, the CRS812 DDQ is designed for top-of-rack, leaf, and aggregation roles in modern high-speed network environments.

The MikroTik CRS418-8P-8G-2S+5axQ2axQ-RM is a powerful 1U rackmount switch that combines Layer 2/3 switching, dual-band 4×4 MIMO Wi-Fi 6, PoE-out, and 10G fibre uplinks into a single rack unit. Driven by a quad-core 2.2 GHz ARM64 CPU with L3 hardware offloading and 1 GB of RAM, it features 16 Gigabit Ethernet ports (eight with 802.3af/at PoE-out), two 10G SFP+ ports, dual-redundant AC power supplies, and USB 3.0 — all running RouterOS v7 with no subscriptions required. An ideal all-in-one solution for small-to-medium offices, server rooms, and hybrid Layer 2/3 network environments.

The MikroTik CRS418-8P-8G-2S+RM is the wireless-free 1U rackmount edition of the CRS418 platform — all the switching, routing, PoE, and 10G uplink capability of the CRS418 series without the Wi-Fi 6 radio. It combines 16× Gigabit Ethernet ports (8 with 802.3af/at PoE-out), a dedicated Gigabit management port, 2× 10G SFP+ uplinks, the quad-core IPQ-8072A 2.2 GHz ARM64 CPU with L3 hardware offloading, 1 GB RAM, dual redundant AC power supplies, USB 3.0, and RouterOS v7 License Level 5 — a clean, no-compromise rackmount switch-router for environments where Wi-Fi is handled separately or not needed at all.

The MikroTik ATL 5G R16 (ATLGM&RG520F-EU) is MikroTik's first outdoor 5G CPE with built-in eSIM — a rugged, IP66-rated, snow-resistant outdoor unit combining a 16 dBi high-gain directional antenna array (4× mid-band + 4× low-band), 5G Release 16 modem with LTE Cat 20, 4×4 MIMO, full Band 28 support for rural low-band coverage, eSIM with MikroTik Connectivity alongside Micro SIM, 1× Gigabit Ethernet with 802.3af/at PoE-in, dual-core ARM64 88F3720 CPU at 800 MHz, 512 MB RAM, passive cooling, and RouterOS v7 License Level 3. Install it on any rooftop, pole, or mast, power it with a single PoE cable, and be online in minutes with no SIM card required.

The MikroTik netPower Lite 8P (CSS610-8P-2S+OUT) is a compact, low-cost outdoor PoE switch with an integrated UPS and smart battery charger — keeping CCTV cameras, access points, and wireless backhaul online even when the grid goes dark. It features 8× Gigabit Ethernet PoE-out (802.3af/at), 2× 10G SFP+ uplinks, 120W total PoE budget, 24–57V DC input, IP54 weatherproofing, and SwOS Lite — built for WISPs, CCTV deployments, apartment buildings, utilities, and smart-city installations.

The MikroTik LHGG LTE7 Kit (LHGGR&R11e-LTE7) is a rugged outdoor LTE Cat7 router with a built-in 17 dBi directional grid antenna for last-mile internet in remote and rural locations. It delivers up to 300 Mbps downlink and 100 Mbps uplink — double the upload speed of the LTE6 predecessor — with expanded band support including B28 and B32. IP54 rated, pole or mast mountable, and operating from -40°C to +70°C, it ships with RouterOS v7 preinstalled.

The MikroTik wAP ax LTE7 Kit (wAPGR-5HaxD2HaxD&R11e-LTE7) is an evolution of the wAP ac LTE6 — now upgraded with Wi-Fi 6, LTE Cat7, a stronger ARM platform, and improved antenna gain in a next-gen IP66 weatherproof enclosure. It delivers up to 300 Mbps downlink and 100 Mbps uplink with 2×2 MIMO, dual-band coverage at up to 1,774 Mbps combined, expanded LTE band support including B28 and B32, and CAPsMAN support for centralized multi-device management. Passively cooled, vandal-resistant, and wall or pole mountable.

The MikroTik LtAP LTE7 kit (LtAP-2HnD&R11e-LTE7) is a compact, heavy-duty LTE Category 7 access point built for mobile and outdoor deployments. Housed in a rugged IP54-rated weatherproof enclosure, it combines built-in GPS, 2×2 MIMO LTE Cat7 connectivity (up to 300 Mbps download / 100 Mbps upload), 2.4 GHz Wi-Fi 4, three Mini SIM slots for automatic roaming, and flexible automotive/DC/PoE powering — all powered by RouterOS v7. Purpose-built for logistics, transport, fleet tracking, and any application where reliable mobile connectivity in harsh environments is essential.

The MikroTik DDQ+85MP01D is a QSFP-DD 400G optical transceiver module designed for high-speed fibre connections in ultra-fast network environments such as the CRS812 DDQ and CRS804 DDQ. Using an MTP/MPO connector with 850nm multimode optics, it is ideal for 400G deployments where direct-attach cable (DAC) reach is insufficient. The module features built-in digital diagnostics monitoring — covering optical power, voltage, temperature, and laser bias current — for proactive health monitoring in demanding data centre and core network installations. An MTBF of approximately 200,000 hours at 25°C ensures long-term reliability.