List of products by supplier MikroTik

The GPeR is a Gigabit Passive Ethernet Repeater that extends Ethernet connections up to 1,500 meters by adding hops of 100-210 meters between devices. It's a cost-effective solution for overcoming cable length limitations in large or multi-story buildings.

The MikroTik TG-BT5-OUT is an outdoor Bluetooth 5.2 IoT asset tracking tag — IP69K (dust-tight, high-pressure washdown rated), cast in industrial-grade sealed mould, built-in temperature sensor (±0.5°C precision), accelerometer, NFC encoded MAC address, optional encryption, supports iBeacon, Eddystone, and MikroTik telemetry formats, 550 mAh battery (~5 years at 1s sending interval), 512 KB FLASH, -20°C to +85°C operating range, MTBF ~100,000 hours at 25°C. Compatible with MikroTik KNOT and any BLE 5.2 gateway. CE, FCC, IC, EAC, RoHS certified. No RouterOS — standalone BLE tag. USD 18.00.

The MikroTik Cube 60Pro ac (CubeG-5ac60ay) is a single 60 GHz 802.11ay point-to-point CPE — 2.4 km tested range (1 km standard, 2.4 km with Channel 5), automatic 5 GHz 802.11a/n/ac failover (433 Mbps, 11.5 dBi directional antenna), Qualcomm IPQ-4019 quad-core ARM 32bit at 448–896 MHz, 256 MB RAM, 64 MB FLASH, RouterOS v7 License 4, 1× GbE PoE-in (802.3af/at, 18–48V), GPS, passive cooling, metal base enclosure, IP66, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, FCC, IC, EAC, RoHS. Includes cube mount bracket, 24V 0.8A adapter, hose clamp, GbE PoE injector. USD 149.00.

The MikroTik CubeSA 60Pro ac is an outdoor 60 GHz sector access point designed for point-to-multipoint (PtMP) deployments, allowing a single unit to connect multiple 60 GHz client devices at distances of around 600 metres. Using the 802.11ay standard on the 60 GHz band and a 5 GHz 802.11a/n/ac (Wi-Fi 5) radio as an automatic backup, it delivers high-throughput, interference-free wireless links in environments where the 2.4 GHz and 5 GHz spectrum is congested. The unit is built on a quad-core ARM CPU with a metal base enclosure rated IP66 for outdoor deployment, runs RouterOS with a Level 4 licence, and is powered via a single 802.3af/at PoE input. It includes built-in GPS for precise location tracking and timing.

The MikroTik Wireless Wire Cube Pro (CubeG-5ac60aypair) is a preconfigured point-to-point kit of two Cube 60Pro ac devices — 802.11ay 60 GHz primary link (up to 2.4 km tested), automatic 5 GHz 802.11a/n/ac failover (433 Mbps, 11.5 dBi directional antenna), Qualcomm IPQ-4019 quad-core ARM 32bit at 448–896 MHz, 256 MB RAM, 64 MB FLASH, RouterOS v7 License 4, 1× GbE PoE-in (802.3af/at, 18–48V) per unit, GPS, passive cooling, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, FCC, IC, EAC, RoHS certified. Includes 2× cube mount brackets, 2× 24V 0.8A adapters, 2× hose clamps, 2× GbE PoE injectors. USD 298.00 per pair.

The MikroTik XQ+DA0001 is a 1-metre passive Direct Attach Copper (DAC) twinax cable with QSFP+ to QSFP+ and QSFP28 to QSFP28 connectors, supporting both 40 Gigabit and 100 Gigabit data rates. Designed for direct short-reach interconnects between QSFP28-equipped MikroTik devices — including the CCR2216, CRS504, CRS518, CRS510, and CRS520 — it offers a plug-and-play, zero-latency alternative to fibre transceivers and patch cables for within-cabinet or same-rack connections. The 1-metre length is the ideal choice for connecting devices installed in adjacent rack units or a tightly grouped cabinet stack.

The MikroTik XQ+DA0003 is a 3-metre passive Direct Attach Copper (DAC) twinax cable with QSFP+ to QSFP+ and QSFP28 to QSFP28 connectors, supporting both 40 Gigabit and 100 Gigabit data rates. It is designed for direct short-reach interconnects between QSFP28-equipped MikroTik devices such as the CCR2216, CRS504, CRS518, CRS510, and CRS520, offering a latency-free, plug-and-play alternative to optical transceivers and fibre patch cables for rack-to-rack or within-cabinet connections. The 3-metre length provides enough reach to comfortably span adjacent rack units or nearby racks while keeping cable management tidy and installations clean.

The S-RJ01 is an RJ45 SFP module supporting 10/100/1000M speeds for copper Ethernet connections. Compatible with most Gigabit SFP ports, it offers seamless integration with various networking devices.

The MikroTik XS+85LC01D is a cost-effective multimode SFP/SFP+/SFP28 transceiver module supporting 1.25G, 10G, and 25G data rates over distances of up to 100 metres via a Dual LC UPC connector. Operating at 850 nm wavelength, it is compatible with a wide range of MikroTik devices including the RB5009, CCR2116, netPower series, and various CRS and CSS switches. Built-in digital diagnostics provide real-time monitoring of key transceiver parameters to assist with network health visibility and proactive maintenance planning.

The MikroTik CRS304-4XG-IN is a compact 4-port 10 Gigabit Ethernet desktop switch and router — 4× RJ45 10GbE copper ports (no SFP, no SFP+), Marvell Prestera 98DX3236 switch chip, quad-core ARM64 AL21400 at 1,400 MHz, 1 GB RAM, 1 GB NAND, dual-boot SwOS and RouterOS v7 License 6, USB 3.0 Type-A, DC jack (18–28V), passive cooling, IP20, -20°C to +50°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS certified. Includes 24V 1.2A power adapter. The correct compact 10GbE desktop switch for homelab operators, small server rooms, and 10G-ready workstation deployments where RJ45 copper 10GbE connectivity is required without SFP+ cabling, transceivers, or rack infrastructure.