Wireless for Home and Office

The MikroTik mAP lite (RBmAPL-2nD) is MikroTik's smallest wireless access point — barely larger than a matchbox at just 48 × 49 × 11 mm — yet it runs the full MikroTik RouterOS feature set on a dual-chain 2.4GHz 802.11b/g/n (Wi-Fi 4) radio. Designed for portability and versatility, it can be powered via microUSB (5 V) or 802.3af/at PoE, consumes just 3.5 W, and is equally at home as a travel router, a hotel room Wi-Fi extender, a server configuration tool, or a discreet permanent access point installation. Running RouterOS with a QCA9533 processor at 650 MHz and 64 MB of RAM, the mAP lite delivers full networking capability in the smallest possible package — ideal for technicians, travellers, and network professionals who need RouterOS in their pocket.

The MikroTik Chateau 5G R17 ax (S53UG+5HaxD2HaxD-TC&RG650E-EU) is a premium 5G home and office router featuring MikroTik's most advanced mobile modem yet — a 5G Release 17 module with LTE Cat20 capability, 4×4 MIMO, and wide FDD/TDD band support for both 5G NSA and SA modes. What sets it apart is a true built-in eSIM alongside a physical Micro SIM slot, enabling immediate connectivity without needing a physical SIM card — compatible with MikroTik Connectivity and third-party eSIM providers. Paired with dual-band Wi-Fi 6 (4×4 MIMO on both bands), a quad-core ARM64 CPU with 1 GB of RAM, four Gigabit Ethernet ports, one 2.5 Gigabit Ethernet port, a USB-A port, and RouterOS v7, the Chateau 5G R17 ax is a powerful all-in-one 5G gateway for homes, remote workers, and mobile operators.

The MikroTik RB4011iGS+5HacQ2HnD-IN is a powerful indoor router combining ten Gigabit Ethernet ports, a 10Gbps SFP+ cage, and integrated dual-band 802.11ac Wi-Fi in a single desktop unit. At its core is a quad-core Cortex A15 AL21400 processor — the same architecture used in MikroTik's carrier-grade hardware — paired with 1 GB of RAM and hardware-accelerated IPsec, delivering serious routing performance for demanding environments. The 5GHz four-chain radio delivers up to 1733 Mbit/s (Wi-Fi 5), while the 2.4GHz two-chain radio adds 300 Mbit/s 802.11n coverage. Running RouterOS v7 with a MiniPCI-e expansion slot, passive PoE output on port 10, and dual power input options.

The MikroTik hAP be³ Media (MA53UG+HbeH) is a professional all-in-one Wi-Fi 7 router designed for users who demand top-tier wireless performance, powerful routing capabilities, and a versatile media platform in a single device. Featuring tri-band 2×2 MIMO Wi-Fi 7 across 2.4 GHz, 5 GHz, and 6 GHz, five 2.5 Gigabit Ethernet ports, a quad-core ARM64 CPU, USB-C and dual USB-A ports, a microSD card slot, Bluetooth 5.4, and a built-in Thread radio, the hAP be³ Media is built for demanding home networks, home labs, and smart IoT environments — all running on RouterOS v7 with no subscriptions required.

The MikroTik KNOT LR9G Kit (RB924iR-2nD-BT5&BG770A&R11e-LR9G) is a compact, affordable industrial IoT gateway built for asset tracking, remote monitoring, and automation. It combines LoRa® 915 MHz with enhanced reception, concurrent GPS and LTE CAT-M1/NB2, Bluetooth 5.2, 2.4 GHz Wi-Fi 4, RS485/Modbus, 2× 100 Mbps Ethernet with PoE-in and PoE-out, GPIO, DIN rail mounting, and RouterOS v7 — all in a passively cooled 6W form factor. Purpose-built for hospitals, cold chain, agriculture, and industrial automation where low-cost, long-range IoT connectivity is essential.

wAP LR9 kit is an out-of-the-box gateway solution for LoRa® technology, operating in the 902-928 MHz frequency range. It includes a weatherproof access point with a 2.4 GHz WLAN interface and an Ethernet port, pre-configured for seamless connectivity to public or private LoRa® servers.

A Wi-Fi router in the next-generation NEXXBOX-C enhanced enclosure, accommodating the RB951Ui-2HnD MikroTik RouterBOARD, with a 2.4 GHz wireless capability and a coverage area of 5000 square feet that can support 30 to 80 Wi-Fi equipment.

The MikroTik wAP LR9G kit (RBwAPR-2nD&R11e-LR9G) is a rugged, out-of-the-box LoRa 915 MHz IoT gateway combining LoRa wireless, built-in GPS, and 2.4 GHz Wi-Fi 4 in MikroTik's proven weatherproof wAP enclosure. With Rx sensitivity down to -141 dBm, three power input options (PoE, automotive, and DC jack), SMA female connectors for external antennas, and a preinstalled UDP packet forwarder compatible with The Things Network and The Things Industries, it is a complete deploy-and-go LoRa gateway for smart agriculture, perimeter monitoring, asset tracking, industrial IoT, and any outdoor sensor deployment.

The MikroTik hAP ac (RB962UiGS-5HacT2HnT) is a dual-band dual-concurrent Wi-Fi 4/5 desktop router — QCA9558 single-core MIPSBE at 720 MHz, 128 MB RAM, 16 MB flash, RouterOS v7 License 4, 2.4 GHz Wi-Fi 4 3×3 MIMO 450 Mbps (2.5 dBi) + 5 GHz Wi-Fi 5 AC1750 3×3 MIMO 1300 Mbps (2 dBi), 5× GbE, 1× SFP, 1× USB Type-A (3G/4G modem or storage), passive PoE-out on Ether5 (700 mA low / 350 mA high), dual power input (DC jack 11–57V + passive PoE-in 11–57V), 17W max, beeper, PCB temperature + voltage monitors, passive cooling, IP20, 114 × 137 × 29 mm, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, FCC, IC, EAC, RoHS. Includes 24V 1.2A power adapter. Free software updates for life of product or minimum 5 years from purchase.

The MikroTik KNOT Embedded LTE4 Global (EG25-G&KNe) is a compact industrial LTE Cat4 gateway with Bluetooth 5.4, GNSS/GPS, and Gigabit Ethernet in a DIN rail-mountable form factor. It features eSIM plus Nano SIM support with expanded global LTE band coverage including North American bands B12, B13, and B28, making it suited for IoT deployments, industrial automation, and asset tracking. Powered by RouterOS v7 and certified CE, FCC, IC, and EAC.