Hardware

MikroTik GrooveA 52 ac: Compact outdoor AP/Backbone/CPE with 802.11ac, dual-band 2.4/5GHz support, and Gigabit Ethernet.

The MikroTik wAP ax is a compact dual-band Wi-Fi 6 outdoor and indoor access point — AX3000 with 2×2 MIMO on both 2.4 GHz (574 Mbps, IPQ-5010, 6.9 dBi) and 5 GHz (2,400 Mbps, QCN-6102, 7 dBi), dual-core ARM32 IPQ-5010 at 800 MHz, 256 MB RAM, 128 MB NAND, 2× Gigabit Ethernet ports with 802.3af/at PoE-in, DC jack (12–57V), passive cooling, IP54, -40°C to +70°C, RouterOS v7 License 4, 9W max. WPA3/OWE, CAPsMAN-ready, fast roaming. CE, FCC, IC, EAC, and RoHS certified — fully IC-certified for Canadian sale. Includes 24V 0.8A power adapter, Gigabit PoE injector, desktop stand, ceiling mount bracket, wAP mount, K-52 fastening set, hose clamp, and plastic zip tie. USD 89.00. 

The MikroTik CME Gateway (CME22-2n-BG77) is a rugged outdoor CAT-M narrowband LTE IoT gateway — single-core MIPSBE QCA9531 at 650 MHz, 64 MB RAM, 16 MB FLASH, RouterOS v7 License 4, built-in CAT-M narrowband LTE modem (Nano SIM), built-in GPS, single-chain 802.11b/g/n 2.4 GHz Wi-Fi 4 (150 Mbps, 2 dBi) for local management via MikroTik smartphone app, 2× 10/100 Ethernet (Ether1: 802.3af/at PoE-in 18–57V; Ether2: passive PoE-out up to 57V 600 mA), 2-pin DC terminal 12–57V, 31W max consumption, IP66, -40°C to +70°C, MTBF ~100,000 hours at 25°C. CE, FCC, IC, EAC, RoHS certified. Includes 48V 0.95A power adapter, Gigabit PoE injector, two metal rings. 

The MikroTik XQ+85MP01D is a 100G QSFP28/QSFP+ multimode fiber transceiver — 1×12 MTP/MPO connector, 4× independent full-duplex 25G channels, 850nm VCSEL, 100m reach on OM4 multimode fiber (100GBASE-SR4 / 40GBASE-SR4), built-in digital diagnostic monitoring (optical power). Requires Female-Female Type-B polarity MTP/MPO-12 optical cable. Compatible with MikroTik CCR2216, CRS504-4XQ-IN/OUT, CRS510-8XS-2XQ-IN, CRS518-16XS-2XQ-IN, and any IEEE 100GBASE-SR4 compliant QSFP28 port. MTBF ~100,000 hours at 25°C. No certifications listed (passive optical module). USD 89.00.

The MikroTik hEX PoE is a versatile five-port Gigabit Ethernet router with PoE output for four ports, an SFP port, USB support, and an 800MHz CPU. Designed for advanced wired networking, it supports passive and 802.3af/at PoE standards.

R11eL-FG621-EA is a high-performance, cost-effective mini-PCIe LTE modem, designed as an upgrade to the previous R11 LTE6 modem. It provides speeds of up to 300 Mbps with carrier aggregation for improved connectivity and includes support for the B28 band, making it ideal for EMEA, APAC, and Australia regions.

The MikroTik 915 Omni antenna is a 5.2 dBi omnidirectional antenna kit for LoRa deployments in the 900–928 MHz frequency range — covering the 915 MHz band used in the U.S., Brazil, Australia, New Zealand, and other regions where 915 MHz is preferred over the 868 MHz band. Includes SMA female connector, 1m SMA male-to-SMA male cable with improved durability, and mechanical holder for mast attachment. IP66 rated — protected against powerful water jets — suitable for marine and coastal deployments. Compatible with KNOT LR9 kit, wAP KR9, and any LoRa device with 900–928 MHz support. Passive antenna — no firmware, no configuration. USD 49.00.

The cAP ac is a dual-band wireless access point designed for ceiling or wall mounting. It offers 2.4GHz and 5GHz coverage, dual Gigabit Ethernet ports with PoE support, and IPsec hardware encryption, making it ideal for both aesthetics and functionality.

The MikroTik DQ+BC0003-DS+ is a 3m passive QSFP56 breakout DAC cable that splits a single 200G port into four independent 50G connections. It replaces the XQ+BC0003-XS+ at the same price while adding 200G to 4×50G support, and retains full backward compatibility with 100G to 4×25G and 40G to 4×10G breakout modes. Purpose-built for MikroTik CRS812 DDQ and CRS804 DDQ 200G and 400G switch deployments.

The MikroTik KNOT Embedded LTE4 (EC25-EU&KNe) is a tiny, DIN-rail-mountable industrial LTE Cat4 gateway purpose-built for IoT integrators, automation specialists, and smart-city engineers. Originally designed for coffee and vending machine monitoring, it delivers LTE Cat4 connectivity, Bluetooth 5.4 for BLE sensor integration, built-in GNSS/GPS, eSIM support, a sensor-ready GPIO header, and RouterOS v7 — all in a passively cooled, 7W form factor that fits anywhere space is limited but reliability is critical.