Hardware

The S-31DLC20D is a 1.25G SFP transceiver with a 1310nm Dual LC connector, designed for Single Mode fiber connections up to 20 km. It features DDM support and compatibility with a wide range of MikroTik and non-MikroTik devices.

These OS2 (9/125 µm) singlemode fiber optic pigtails are terminated with SC/UPC connectors on one end and left un-terminated on the other end.
The un-terminated ends are designed to be stripped and fusion-spliced to individual fibers in a multi-strand fiber trunk cable.

S-85DLC05D is a 1.25G SFP transceiver featuring an 850nm Dual LC connector for up to 550 meters of Multi Mode fiber connectivity, complete with DDM (Digital Diagnostics Monitoring) support.

mANT LTE 5o is a 5 dBi omnidirectional LTE antenna with 2 x SMA connectors, ideal for enhancing LTE connectivity in areas with poor coverage. Designed for outdoor use, it pairs perfectly with MikroTik LTE devices like the wAP LTE and LtAP series.

The MikroTik TG-BT5-OUT is an outdoor Bluetooth 5.2 IoT asset tracking tag — IP69K (dust-tight, high-pressure washdown rated), cast in industrial-grade sealed mould, built-in temperature sensor (±0.5°C precision), accelerometer, NFC encoded MAC address, optional encryption, supports iBeacon, Eddystone, and MikroTik telemetry formats, 550 mAh battery (~5 years at 1s sending interval), 512 KB FLASH, -20°C to +85°C operating range, MTBF ~100,000 hours at 25°C. Compatible with MikroTik KNOT and any BLE 5.2 gateway. CE, FCC, IC, EAC, RoHS certified. No RouterOS — standalone BLE tag. USD 18.00.

The 48POW is a high-capacity 48V 1.46A power adapter delivering up to 70W of power, ideal for powering advanced MikroTik networking devices.

The 24HPOW is a high-power 24V 2.5A power adapter, ideal for long cable runs and setups with multiple high-power wireless cards.

These 9 micron (OS2) fiber optic cable is made with Corning ClearCurve LBL glass fiber, which exceeds ITU-T G.657.A2/B2 and remains compatible and fully compliant with ITU-T G.652.D. It has 3mm jacket and rated low smoke zero halogen (LSZH) & riser (OFNR). They are tested to provide the optimum data transmission and network stability. They are used for connections to data center, CATV, fiber test equipment, LAN, telecommunication networks, FTTx, communication rooms and fiber optic communication system.

The FF-FTB8G Fiber Optic Terminal Box is used as a termination point for feeder cables to connect with drop cables or pigtails in FTTH networks.
It supports fiber splicing, splitting, and distribution while providing reliable protection and organized management for FTTH network installations.

The GPEN11 is a wall-mountable power injector designed to power uplink devices with PoE. As part of the GPEN (Gigabit Passive Ethernet Network) concept, it provides a cost-effective and easily deployable alternative to traditional GPON installations.