Switches

The MikroTik CSS318-16G-2S+IN is a compact, passively cooled managed switch featuring 16 Gigabit Ethernet ports and 2 SFP+ 10G uplink ports, running MikroTik's lightweight SwOS operating system. Housed in a 10-inch form factor chassis that also fits 19-inch racks, it is ideal for deployments where 24 ports are too many and 8 ports simply are not enough. With browser-based configuration, broad SwOS feature support, and very low power consumption, it offers a practical and scalable solution for small to medium network environments.

The MikroTik netPower Lite 7R (CSS610-1Gi-7R-2S+OUT) is an outdoor reverse PoE switch designed for MikroTik's GPEN concept — Marvell 88E6193X switch chip, SwitchOS Lite, 8× GbE (7× reverse PoE-in 12–57V passive + 1× passive PoE-out) + 2× SFP+ 10G, 28 Gbps non-blocking throughput, 56 Gbps switching capacity, 41.7 Mpps forwarding rate, triple power input (DC jack, passive PoE-in, 2-pin terminal, all 12–57V), 29W max / 7W without attachments, passive cooling, IP54, 303.5 × 211.9 × 71.3 mm, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes K-66 fastening set and 2× hose clamps. Power supply not included.

The MikroTik CSS610-8G-2S+IN is a compact 10-port Layer 2 managed switch — 88E6393X switch chip, 8× GbE + 2× SFP+ 10G, 20 Gbps full-duplex switching capacity, SwOS web management interface, 1× RJ45 serial console, passive cooling, desktop or rackmount (1U with SFP+ ports facing rear), DC jack (24–57V) or 802.3af/at PoE-in on Ether1, 7.5W max without attachments, 175 × 110 × 28 mm, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Non-PoE variant of the CSS610-8P-2S+IN. Includes 24V 1A power adapter and K-55 screw set. USD 99.00.

The MikroTik RB260GSP is a compact SOHO smart switch offering five Gigabit Ethernet ports, one SFP cage, and passive PoE output on four of its five Ethernet ports — all in a lightweight desktop plastic enclosure. Powered by the QCA8337 switch chip and running MikroTik's dedicated SwOS (SwitchOS) operating system, it delivers straightforward yet flexible Layer 2 switching management through a clean web interface. Ports 2–5 pass through passive PoE at the same voltage applied to the unit, making it simple to power compatible wireless access points, IP cameras, or small routers without the need for separate PoE injectors. 

The MikroTik RB260GS is a compact smart switch with 5x Gigabit Ethernet ports, 1 SFP cage, and SwOS for easy configuration. Ideal for small office and home networks.

The MikroTik CRS520-4XS-16XQ-RM is a high-density, enterprise-grade 100G core switch combining the switching power of a Marvell 98CX8410 chip with the processing muscle of a quad-core 64-bit ARM CPU running at 2 GHz and 4 GB of RAM. It provides 16 × 100G QSFP28 ports, 4 × 25G SFP28 ports, and 2 × 10G Ethernet ports, running RouterOS v7 for advanced Layer 2 and Layer 3 network management. Two hot-swap power supplies and four hot-swap fans are included as standard, making it a resilient, future-proof solution for data centre and enterprise core network deployments.

The MikroTik CRS518-16XS-2XQ-RM is an enterprise-grade 1U rack-mount switch delivering 16× 25 Gigabit SFP28 ports and 2× 100 Gigabit QSFP28 ports, all driven by the Marvell Prestera Aldrin2 (98DX8525) switch chip with a non-blocking switching fabric of up to 1.2 Tbps. The 25G SFP28 ports are fully backward compatible with 10G and 1G SFP devices. Dual hot-swap power supplies with a 100–240 V AC input range and four active cooling fans ensure reliable operation in demanding data centre and enterprise deployments. Running RouterOS v7 with a Level 6 licence, it supports VLAN (802.1Q, 802.1ad), L3 hardware offloaded routing, ACL, LACP, MLAG, and Jumbo frames — making it a powerful and cost-effective core or aggregation switch for high-density 25G and 100G networks.

The MikroTik CRS804 DDQ (CRS804-4DDQ-hRM) is a compact 1U 400G switch built for AI clusters, storage fabrics, and high-speed aggregation. It features four 400G QSFP56-DD ports with flexible breakout down to 1G, dual 1G/10G Ethernet, a Marvell 98DX7335 switch chip, quad-core 2 GHz ARM CPU, 4 GB DDR4 RAM, dual hot-swap redundant power supplies, and two hot-swap cooling fans — all at 123W max power consumption. Runs RouterOS v7 with License Level 6.

The MikroTik CRS106-1C-5S is a compact smart switch with 5x SFP cages, 1x combo SFP/Gigabit port, RouterOS L5, and desktop case. Ideal for SFP device connections.