Hardware

The MikroTik LHGG LTE7 Kit (LHGGR&R11e-LTE7) is a rugged outdoor LTE Cat7 router with a built-in 17 dBi directional grid antenna for last-mile internet in remote and rural locations. It delivers up to 300 Mbps downlink and 100 Mbps uplink — double the upload speed of the LTE6 predecessor — with expanded band support including B28 and B32. IP54 rated, pole or mast mountable, and operating from -40°C to +70°C, it ships with RouterOS v7 preinstalled.

The MikroTik netPower 15FR (CRS318-1Fi-15Fr-2S-OUT) is a compact outdoor reverse PoE switch for MikroTik's GPEN concept — 98DX224S dual-core ARM 32-bit at 800 MHz, 256 MB RAM, 16 MB flash, RouterOS v7 License 5 or SwitchOS, 15× 10/100 reverse PoE-in (18–57V passive) + 1× 10/100 (Ether15, passive PoE-out) + 1× 10/100 fiber uplink (Fi) + 2× SFP, 3.6 Gbps non-blocking throughput, 7.2 Gbps switching capacity, 5.4 Mpps forwarding rate, 16 DC inputs (DC jack + passive PoE-in 18–57V, recommended 36–57V), 29W max / 10W without attachments, passive cooling, IP54, 304 × 212 × 71 mm, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes K-66 fastening set, 2× hose clamps, DC to terminal block adapter. Power supply NOT included.

The Audience is a tri-band home access point with meshing technology, offering exceptional Wi-Fi coverage, reliability, and ease of setup for large homes or challenging environments.

The MikroTik DDQ+85MP01D is a QSFP-DD 400G SR8 optical transceiver module designed for ultra-high-speed fiber deployments on the CRS812 and CRS804 platforms. It delivers 400 Gbps aggregate bandwidth across 8 independent full-duplex channels at 50 Gbps each, covers distances up to 100m via MTP/MPO-16 Female-Female Type-B polarity cable, and includes built-in digital diagnostics for optical power, voltage, temperature, and laser bias current — for USD 159, purpose-built for data centre interconnects and high-density core switching beyond DAC cable reach.

The MikroTik CSS326-24G-2S+RM is a 1U rackmount smart switch with 24 Gigabit Ethernet ports and 2 SFP+ ports, powered by SwOS for versatile network management.

The MikroTik CRS305-1G-4S+IN is a compact, silent desktop switch with 1 Gigabit Ethernet port, 4 SFP+ 10Gbps ports, dual boot OS, and power redundancy.

The XS+31LC10D is a versatile 1.25G SFP, 10G SFP+, and 25G SFP28 module that's perfect for varied network setups. With extended compatibility, it is a direct upgrade from the previous 10G SFP+ 10 km model, offering more features at the same price.

The MikroTik CSS318-16G-2S+IN is a compact 10-inch form factor managed switch — 16 Gigabit Ethernet ports and 2 SFP+ 10G uplink ports running SwOS on an Marvell 98DX2518 switch chip, 16 MB FLASH, passive cooling, 10W without attachments and 13W max, -40°C to +70°C, MTBF ~200,000 hours at 25°C, IP20. CE, EAC, and RoHS certified. Mounts in 10-inch racks, standard 19-inch racks, or two units side-by-side in a single 1U 19-inch rack space. Includes IEC cord, screw set (4), and CSS rack ears. USD 139.00. The correct managed switch for small and medium offices, home networks, and rackmount environments where 24 ports are too many, 8 ports are too few, and 10G SFP+ uplinks are required.

The MikroTik G1483 is a 6Ah LiFePO4 lithium iron phosphate battery backup unit designed for the MikroTik RB5009UG+S+IN, RB5009UPr+S+IN, RB5009UG+S+IN, and the hEX refresh (E50UG) — delivering 21.6Wh of backup energy at 3.6V nominal from a 1× 18650-format LiFePO4 cell array, with integrated charge management, over-discharge protection, and a battery health indicator. Dimensions 132 × 74 × 27 mm, weight 260 g. USD 39.00. The correct battery backup unit to stock alongside any RB5009 or hEX refresh deployment where brief power interruption must not result in router reboot, configuration loss, or network downtime.

The MikroTik hAP ax³ (C53UiG+5HPaxD2HPaxD) is MikroTik's top-of-line home Wi-Fi 6 router — quad-core ARM64 IPQ-6010 at 864–1800 MHz, 1 GB RAM, 128 MB NAND, RouterOS v7 License 6, dual-band Wi-Fi 6 AX1800 (5 GHz QCN-5052 1200 Mbps 5.5 dBi + 2.4 GHz QCN-5022 574 Mbps 3.3 dBi), RP-SMA external antenna ports, 4× Gigabit Ethernet, 1× 2.5G Ethernet (PoE-in passive 18–28V), passive PoE-out on Ether1 (15W max), USB 3.0 Type-A 1.5A, DC jack 12–28V, 38W max, passive cooling, IP20, -40°C to +70°C, MTBF ~200,000 hours. CE, FCC, IC, EAC, RoHS certified. Includes 24V 1.5A adapter, HGO indoor antenna kit, K-47 wall mount set, hAP case base. USD 139.00.