The home Access Point lite (hAP lite) is an ideal little device for your apartment, house or office.
It supports button triggered WPS, for the convenience of not typing a complicated password when somebody wants to have wireless internet access, and can also be told to change to cAP mode and join a CAPsMAN centrally managed network by the push of a button.
Of course, the device runs RouterOS with all the features, bandwidth shaping, firewall, user access control and many others.
The hAP lite is equipped with a powerful 650MHz CPU, 32MB RAM, dual chain 2.4GHz onboard wireless, four Fast Ethernet ports and a RouterOS L4 license. USB power supply is included.
|2.4 GHz||Transmit (dBm)||Receive Sensitivity|
Ethernet test results
|RB941-2nD-TC||QCA953x 100M four port test|
|Mode||Configuration||1518 byte||512 byte||64 byte|
|Bridging||none (fast path)||32.5||394.7||93.9||384.6||430.2||220.3|
|Bridging||25 bridge filter rules||32.5||394.7||83.4||341.6||82.2||42.1|
|Routing||none (fast path)||32.5||394.7||93.9||384.6||221.1||113.2|
|Routing||25 simple queues||32.5||394.7||93.9||384.6||118.7||60.8|
|Routing||25 ip filter rules||32.5||394.7||53.9||220.8||53.9||27.6|
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results