CCR2116 features
zoom_out_map
chevron_left chevron_right

CCR2116-12G-4S+

Forget about CPU limitations in 10G setups with this powerful 16-core ARM CPU-based CCR. Double the performance of our previous 36- core CCR, 6x faster BGP performance. Includes an M.2 PCIe slot.

US/Canada
We only offer IC Certified products. For international products, contact us.
Please note!
Ship Charge Will Display As Free Until Ship Address / Location Is Provided To Calculate Ship Charge.

We wanted to see the full potential of the good, old, reliable 10G networking combined with a modern CPU. CCR2116-12G-4S+ allows you to forget about CPU limitations in your setup. Like its younger brother – the amazing CCR2004, this router features the mighty Amazon Annapurna Labs Alpine CPU.

But with 16 cores running at 2 GHz, this CCR eats the other one for breakfast. For example, we see at least a 15% increase in single-core performance. And that is the most important aspect when it comes to heavy operations based on per-connection processing. Like queues, for example. CCR2116-12G-4S+ sets a new standard of single-core performance in the whole CCR product family! And it supports Layer 3 Hardware Offloading!

Obviously, you need the right connectivity to harness this power. There are four 10G SFP+ ports. They have a separate, full-duplex line connected to the Marvell Aldrin family switch chip. Then we have Gigabit Ethernet ports. 12 of them are running through the Marvel chip. And there is another Gigabit port connected directly to the CPU. For management purposes.

Each group of 4 ports has a separate full-duplex connection to the switch chip. No bottlenecks here. You can expect switch-like throughput in most setups. The new generation of processors offers mind-blowing performance. If we look at the CCR1036 - the powerhouse with a 36 core CPU, the new CCR2116 can easily double the performance. 16 cores vs 36 cores. Double the performance. Or even more.

If you are a rather large ISP, dealing with dynamic routing, massive BGPs, complex firewall rules, and intricate quality of service configurations..This is the right device for you. Combination of raw power and utility with the reliable 10G networking. And yes, like with any ISP-level device, we’ve included a dual-redundant power supply. So you have one less thing to worry about.

CCR2116-12G-4S+: technology tested by time, built for the future.

Ethernet test results

CCR2116-12G-4S+ AL73400 all port test (CCR2116)
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 3204.8 38919.1 9114.6 37333.4 29458.9 16025.6
Bridging 25 bridge filter rules 2662.5 32333.4 2682.2 10986.3 2758.9 1500.8
Routing none (fast path) 3212.2 39009.0 9125.3 37377.2 28095.6 15284.0
Routing 25 simple queues 3212.2 39009.0 6322.6 25897.4 6300.9 3427.7
Routing 25 ip filter rules 3212.2 39009.0 3927.9 16088.7 3901.5 2122.4
Routing none (L3HW) 4226.3 51323.7 12218 50045.1 73863.6 40181.8
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

The device has an operating system preinstalled and licensed. No separate purchase is necessary and the product is ready to use. The device includes free software updates for the life of the product or a minimum of 5 years starting from date of purchase..

MikroTik
CCR2116-12G-4S+
10/100/1000 Ethernet ports
13
CPU
AL73400
Product code
CCR2116-12G-4S+
Architecture
ARM 64bit
CPU core count
16
CPU nominal frequency
2000 MHz
License level
ROS L6
Operating System
RouterOS (v7 only)
Size of RAM
16 GB
Storage size
128 MB
Storage type
NAND
Tested ambient temperature
-20°C to 60°C
Max Power consumption
72 W
Number of AC inputs
2
AC input range
100-240
M.2 slots
1
SFP+ ports
4
Serial port
RJ45
CPU temperature monitor
YES
PCB temperature monitor
YES
Max power consumption without attachments
60 W
Certification
CE, EAC, ROHS
Mode button
YES
MTBF
Approximately 200'000 hours at 25C