MikroTik MTP250-53V47-OD Outdoor 53V 250W AC/DC PSU
The MikroTik MTP250-53V47-OD is an outdoor-rated AC/DC power supply unit designed to provide centralised 53 V power for MikroTik's netPower product line and other outdoor devices requiring higher-voltage DC power. Delivering up to 250 W at 53 V (approximately 4.7 A), it is housed in a rugged IP67-rated enclosure that provides full protection against dust ingress and immersion, making it suitable for demanding pole or wall-mount outdoor installations. It is the higher-voltage companion to the MTP250-26V94-OD (26 V / 250 W), and the appropriate choice for setups such as networks of PTZ security cameras or other outdoor equipment that requires a higher DC supply voltage. Two hose clamps are included for pole mounting. Certifications include CE, EAC, and RoHS.
We only offer IC Certified products. For international products, contact us.
Ship Charge Will Display As Free Until Ship Address / Location Is Provided To Calculate Ship Charge.
The MTP250-53V47-OD addresses a common challenge in outdoor network and surveillance deployments: getting sufficient, well-regulated DC power to outdoor switches, cameras, and access points without relying on long runs of low-voltage cabling. As part of the MikroTik MTP250 outdoor power supply series, it converts mains AC input to a stable 53 V DC output at up to 250 W, centralising power distribution at the point of installation rather than running individual power adapters to each device.
The 53 V output voltage makes this unit particularly well suited to higher-voltage device ecosystems. Where 26 V units (such as the MTP250-26V94-OD companion product) serve home access points and devices rated for 12–30 V, the MTP250-53V47-OD is the appropriate choice for installations requiring a higher supply rail — such as extended PoE runs to PTZ cameras, netPower switches, or other outdoor equipment with DC jack input voltage requirements in the 48–57 V range. Always verify the DC jack input voltage specification of connected devices before selecting the appropriate unit.
The enclosure carries an IP67 rating, meaning it is completely dust-tight and withstands temporary immersion in water — the highest weatherproofing level in the MTP250 series. Pole and wall mounting are both supported, and two hose clamps are included in the box for straightforward pole installation. Operating temperature spans -40 °C to 70 °C, covering arctic to tropical deployment environments.
Key Specifications at a Glance
- Product Code: MTP250-53V47-OD
- Output Voltage: 53 V DC
- Output Power: 250 W
- Output Current: ~4.7 A
- Type: Outdoor AC/DC power supply
- IP Rating: IP67
- Mounting: Pole / wall mount
- Operating Temperature: -40 °C to 70 °C
- MTBF: ~100,000 hours at 25 °C
- Certifications: CE, EAC, RoHS
- Included: 2× hose clamps
- Product code
- MTP250-53V47-OD
- Dimensions
- 240 x 46.5 x 69
- Operating Temperature
- -40°C to +70°C
- Certification
- CE, FCC, IC, IP67
