Hot-swap 12 V 150 W AC/DC power supply for CCR1072-1G-8S+.
Passive Gigabit PoE base unit for powering passive PoE devices over Ethernet.
Advanced wall mount adapter for LHG.
There are 39 products.
The Wireless out of band management USB stick
Quick & Economical Mount For LHG series, Dynadish, Disc, SXT series
An advanced pole mount adapter for LHG series products
This Cat6 FTP outdoor UV direct burial Ethernet cable consists of RJ45 male with IP68 rated shroud on one end and an RJ45 male on the other. It is typically used outdoors either above or below ground as a premise wiring to connect network devices and intended to mate with our IP68 rated couplers for a weather-tight seal.
PoE injector, for 10/100Mbps products
48 to 24V 10/100/1000Mbps PoE converter 802.3af support, 802.3at PoE plus support
PoE injector, for Gigabit LAN products
A new revision of Gigabit Ethernet Surge Protector in IP67 waterproof enclosure
Fibre to the Copper converter, Outdoor case, 12-57V PoE with 802.3af/at support
A simple solution for mounting the RB4011 in public locations to avoid accidental unplugging of cables.
Wall mount kit for RB2011 desktop series, Protects cables, Powder coated steel
Advanced wall mount adapter for LHG
Advanced wall mount adapter for small point to point and sector antennas
Advanced wall mount adapter for large point to point and sector antennas
Basic wall mount adapter for small point to point and sector antennas
Hot Swap -48V DC telecom power supply for CCR1072
LMR-195 N-Type Male to N-Type Female Cable
Outdoor 53V 250W AC/DC power supply units for the MikroTik netPower product line. Built for situations when your outdoor switches need that extra juice. Pole/wall mount compatible!
Outdoor 26V 250W AC/DC power supply units for the MikroTik netPower product line. Built for situations when your outdoor switches need that extra juice. Pole/wall mount compatible!
Mobile Quick Setup - system administrator’s best friend
Basic pole mount adapter for LHG series, made from metal
Rackmount ears for RB4011 series
IP68 outdoor enclosure for the GPeR.
GPER, Gigabit Passive Ethernet Repeater
Smart power injector that serves as an advanced software-controlled repeater
A power injector that can be mounted on a wall
A new revision of the classic MikroTik GESP surge protector and a brand new device – the GESP+PoE, a passive PoE injector with surge protection. Together these two devices offer maximum security and peace of mind.
Low loss cable assembly, soldered on both ends, with silver plated copper and less than 0.65dB losses
40x40x28mm DC Fan 4wire cable length 150mm ; 4pin connector
2.4/5Ghz Omni antenna, 4dBi gain, MMCX connector
A 2.4Ghz 5dBi Dipole antenna with RPSMA connector
MMCX to RPSMA pigtail
48 V 2 A 96 W power supply with plug
48V 1.46A 70W power adapter
24V 2.5A adapter
PoE injector, for Gigabit LAN products
24V 2.5A adapter
24V 0.8A Power adapter
PoE injector, for Gigabit LAN products
24V 0.8A Power adapter
Hot Swap power supply for CCR1072
