60 GHz products

The MikroTik Wireless Wire Cube Pro (CubeG-5ac60aypair) is a preconfigured point-to-point kit of two Cube 60Pro ac devices — 802.11ay 60 GHz primary link (up to 2.4 km tested), automatic 5 GHz 802.11a/n/ac failover (433 Mbps, 11.5 dBi directional antenna), Qualcomm IPQ-4019 quad-core ARM 32bit at 448–896 MHz, 256 MB RAM, 64 MB FLASH, RouterOS v7 License 4, 1× GbE PoE-in (802.3af/at, 18–48V) per unit, GPS, passive cooling, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, FCC, IC, EAC, RoHS certified. Includes 2× cube mount brackets, 2× 24V 0.8A adapters, 2× hose clamps, 2× GbE PoE injectors. USD 298.00 per pair.

The MikroTik Wireless Wire (RBwAPG-60adkit) is a complete point-to-point wireless kit that replaces a Gigabit Ethernet cable with a 60 GHz radio link — delivering 1 Gbps full duplex throughput for distances of up to 200 metres. The kit includes two wAP 60G devices that are pre-paired at the factory, so installation is as simple as pointing the two units at each other and powering them on. The 60 GHz link operates outside the congested 2.4 GHz and 5 GHz Wi-Fi spectrum, providing a stable, interference-free connection secured with AES encryption. Each unit runs RouterOS Level 3 on a quad-core ARM processor, is PoE-powered, rated IP55, and rated for outdoor operation from -40°C to +70°C. 

The MikroTik CubeSA 60Pro ac is an outdoor 60 GHz sector access point designed for point-to-multipoint (PtMP) deployments, allowing a single unit to connect multiple 60 GHz client devices at distances of around 600 metres. Using the 802.11ay standard on the 60 GHz band and a 5 GHz 802.11a/n/ac (Wi-Fi 5) radio as an automatic backup, it delivers high-throughput, interference-free wireless links in environments where the 2.4 GHz and 5 GHz spectrum is congested. The unit is built on a quad-core ARM CPU with a metal base enclosure rated IP66 for outdoor deployment, runs RouterOS with a Level 4 licence, and is powered via a single 802.3af/at PoE input. It includes built-in GPS for precise location tracking and timing.

wAP 60G AP: A weatherproof, integrated 60 GHz Base Station with 60° beamforming antenna. Supports up to 8 simultaneous clients for indoor or outdoor Point-to-Multipoint, Point-to-Point, or CPE setups.

The MikroTik Cube 60Pro ac (CubeG-5ac60ay) is a single 60 GHz 802.11ay point-to-point CPE — 2.4 km tested range (1 km standard, 2.4 km with Channel 5), automatic 5 GHz 802.11a/n/ac failover (433 Mbps, 11.5 dBi directional antenna), Qualcomm IPQ-4019 quad-core ARM 32bit at 448–896 MHz, 256 MB RAM, 64 MB FLASH, RouterOS v7 License 4, 1× GbE PoE-in (802.3af/at, 18–48V), GPS, passive cooling, metal base enclosure, IP66, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, FCC, IC, EAC, RoHS. Includes cube mount bracket, 24V 0.8A adapter, hose clamp, GbE PoE injector. USD 149.00.

The MikroTik Wireless Wire nRAY (nRAYG-60adpair) is a kit of two pre-paired 60 GHz point-to-point devices — 88F3720 dual-core ARM64 at 1 GHz per unit, 256 MB RAM, 16 MB flash, RouterOS v7 License 3, AES-encrypted wireless link, up to 2 Gbps aggregate throughput at distances up to 1,500 m, 1× GbE per unit (802.3af/at PoE-in, 12–57V), 7W max per unit, passive cooling, IP55, snow-resistant form factor, fine-tune alignment screws, 261 × 166 mm per unit, -30°C to +70°C, MTBF ~200,000 hours at 25°C. CE, FCC, IC, EAC, RoHS. Includes 2× 24V 0.38A power adapter, 2× Gigabit PoE injector, 2× nRAY solidMOUNT pole adapter, 2× nRAY aiming tool. Pre-configured — plug in and point.

Wireless Wire Dish: Achieve 2 Gbps aggregate speeds over a distance of up to 1.5 km! A revolutionary 60 GHz wireless solution offering fiber-like quality and stability at a fraction of the cost.

The MikroTik LHG 60G is a high-speed outdoor 60 GHz CPE unit designed for Point-to-Multipoint wireless deployments. Built around the 802.11ad standard, it is purpose-built for environments where 2.4 GHz and 5 GHz spectrum is congested and unreliable, offering an interference-free 60 GHz alternative with data rates up to 2 Gbps. Up to eight LHG 60G units can connect simultaneously to a compatible 60 GHz access point, such as the wAP 60G AP or wAP 60Gx3 AP, with a maximum P2MP range of 800 metres and P2P range of up to 1,500 metres. The unit features a built-in grid antenna, a single Gigabit Ethernet PoE port, passive cooling, an IP55 weatherproof enclosure, and an operating temperature range of -40°C to +70°C. It runs RouterOS Level 3 on a quad-core ARM processor.