List of products by brand MikroTik

The MikroTik GPeR-IP67-Case is a weatherproof outdoor enclosure designed exclusively for GPeR units — IP68 rated (dust-tight and submersion-proof despite the IP67 name on the label), wall and pole mountable, suitable for extending Ethernet networks in mines, caves, maintenance shafts, and outdoor installations. Product code GPeR-IP67-Case. EAN 4752224008374. No active electronics — passive mechanical enclosure accessory. MTBF approximately 100,000 hours at 25°C. Dimensions not published by MikroTik.

The RBGPOE is a Gigabit PoE injector designed to power any RouterBOARD device through Gigabit Ethernet. With shielded connectors and support for 18-57V input, it ensures efficient and reliable power delivery, reducing cable clutter.

The K-65 rackmount ears are designed specifically for the RB4011 series, enabling seamless installation of units in standard rack setups.

The RBPOE is a cost-effective passive PoE injector designed for powering 10/100Mbps RouterBOARD devices. It simplifies installations by reducing the number of cables required.

The MikroTik CRS520-4XS-16XQ-RM is a high-density, enterprise-grade 100G core switch combining the switching power of a Marvell 98CX8410 chip with the processing muscle of a quad-core 64-bit ARM CPU running at 2 GHz and 4 GB of RAM. It provides 16 × 100G QSFP28 ports, 4 × 25G SFP28 ports, and 2 × 10G Ethernet ports, running RouterOS v7 for advanced Layer 2 and Layer 3 network management. Two hot-swap power supplies and four hot-swap fans are included as standard, making it a resilient, future-proof solution for data centre and enterprise core network deployments.

The MikroTik CRS804 DDQ (CRS804-4DDQ-hRM) is a compact 1U 400G switch built for AI clusters, storage fabrics, and high-speed aggregation. It features four 400G QSFP56-DD ports with flexible breakout down to 1G, dual 1G/10G Ethernet, a Marvell 98DX7335 switch chip, quad-core 2 GHz ARM CPU, 4 GB DDR4 RAM, dual hot-swap redundant power supplies, and two hot-swap cooling fans — all at 123W max power consumption. Runs RouterOS v7 with License Level 6.

The MikroTik CRS812 DDQ (CRS812-8DS-2DQ-2DDQ-RM) is a high-performance 1U rackmount aggregation switch that brings 50G, 200G, and 400G connectivity to data centres, campus cores, and service provider networks at an accessible price point. Powered by a Marvell 98DX7335 switch chip and a quad-core 2 GHz ARM64 CPU with 4 GB of RAM, it features eight 50G SFP56 ports, two 200G QSFP56 ports, two 400G QSFP56-DD ports, and two 1G/10G Ethernet ports — with full QSFP56/QSFP-DD breakout support down to 1G/2.5G/5G/10G/25G/50G. Equipped with dual hot-swap redundant power supplies, four hot-swap cooling fans, and RouterOS v7, the CRS812 DDQ is designed for top-of-rack, leaf, and aggregation roles in modern high-speed network environments.

The MikroTik CRS504-4XQ-IN is a compact 100G switch — Marvell 98DX4310 switch ASIC, QCA9531 management CPU (MIPSBE, 650 MHz), 64 MB RAM, 16 MB FLASH, RouterOS v7 License 5, 4× QSFP28 (100G, breakout-capable to 16× 25G), 1× 10/100 Ethernet (management), RJ45 serial console, 2× AC hot-swap PSU slots (100–240V), 3× DC inputs (DC jack 36–57V + 802.3bt PoE-in 43–57V + 2-pin terminal 36–57V), 2 fans, 41W max / 25W without attachments, PCB temperature monitor, IP20, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes rack ears, K10 screw kit, 2× IEC cord. USD 799.00.

The MikroTik CRS326-24S+2Q+RM is a high-performance rackmount switch with 24 SFP+ ports, 2 QSFP+ ports, dual boot OS, and a total switching capacity of 640 Gbps.

The MikroTik CRS328-4C-20S-4S+RM is a feature-rich 1U rackmount managed switch offering 28 independent ports in a highly flexible configuration: twenty 1GbE SFP cages, four 10GbE SFP+ cages, and four combo ports that accept either a Gigabit Ethernet RJ45 connection or an SFP module. Powered by the 98DX3236 switching chip with a dual-core 800 MHz ARM CPU and 512 MB of RAM, it delivers non-blocking Layer 2 wire-speed switching. Like other CRS-series devices, it supports dual boot between RouterOS and SwitchOS, allowing operators to choose between full Layer 3 routing capability or a streamlined managed switch interface. Dual redundant power supplies provide high-availability operation.