List of products by brand MikroTik

The MikroTik wAP ax is a compact dual-band Wi-Fi 6 outdoor and indoor access point — AX3000 with 2×2 MIMO on both 2.4 GHz (574 Mbps, IPQ-5010, 6.9 dBi) and 5 GHz (2,400 Mbps, QCN-6102, 7 dBi), dual-core ARM32 IPQ-5010 at 800 MHz, 256 MB RAM, 128 MB NAND, 2× Gigabit Ethernet ports with 802.3af/at PoE-in, DC jack (12–57V), passive cooling, IP54, -40°C to +70°C, RouterOS v7 License 4, 9W max. WPA3/OWE, CAPsMAN-ready, fast roaming. CE, FCC, IC, EAC, and RoHS certified — fully IC-certified for Canadian sale. Includes 24V 0.8A power adapter, Gigabit PoE injector, desktop stand, ceiling mount bracket, wAP mount, K-52 fastening set, hose clamp, and plastic zip tie. 

The MikroTik CME Gateway (CME22-2n-BG77) is a rugged outdoor CAT-M narrowband LTE IoT gateway — single-core MIPSBE QCA9531 at 650 MHz, 64 MB RAM, 16 MB FLASH, RouterOS v7 License 4, built-in CAT-M narrowband LTE modem (Nano SIM), built-in GPS, single-chain 802.11b/g/n 2.4 GHz Wi-Fi 4 (150 Mbps, 2 dBi) for local management via MikroTik smartphone app, 2× 10/100 Ethernet (Ether1: 802.3af/at PoE-in 18–57V; Ether2: passive PoE-out up to 57V 600 mA), 2-pin DC terminal 12–57V, 31W max consumption, IP66, -40°C to +70°C, MTBF ~100,000 hours at 25°C. CE, FCC, IC, EAC, RoHS certified. Includes 48V 0.95A power adapter, Gigabit PoE injector, two metal rings. 

The MikroTik XQ+85MP01D is a dual-rate QSFP+/QSFP28 fibre transceiver module supporting both 40 Gigabit and 100 Gigabit operation over multimode fibre. Using an 850 nm wavelength and a 12-fibre 1×12 MTP/MPO connector in an SR4 configuration, it achieves link distances of up to 100 metres — making it well suited for high-density data centre and core switching deployments within a building or campus. It is compatible with MikroTik's 40G/100G QSFP28-equipped switches and routers such as the CCR2216, CRS504, and CRS518, and provides a cost-effective way to add short-reach 40G or 100G multimode fibre connectivity to any supported platform.

The MikroTik hEX PoE (RB960PGS) is a compact, affordable five-port Gigabit Ethernet router designed for locations where wireless connectivity is not required. Powered by an 800MHz QCA9557 MIPSBE CPU and 128MB of RAM, it handles all RouterOS L4 features including advanced routing, firewalling, and traffic management with ease. Four of its five Gigabit Ethernet ports (Ether2–5) deliver passive PoE or 802.3af/at PoE output at up to 1A per port, allowing it to power connected access points, IP cameras, or other PoE devices directly — eliminating the need for separate PoE injectors. An SFP port adds fibre uplink capability, while a USB 2.0 Type-A port (with power reset) supports modems, storage devices, or other USB peripherals. Passively cooled and built to operate from -40°C to +60°C.

The MikroTik 915 Omni antenna is a 5.2 dBi omnidirectional antenna kit for LoRa deployments in the 900–928 MHz frequency range — covering the 915 MHz band used in the U.S., Brazil, Australia, New Zealand, and other regions where 915 MHz is preferred over the 868 MHz band. Includes SMA female connector, 1m SMA male-to-SMA male cable with improved durability, and mechanical holder for mast attachment. IP66 rated — protected against powerful water jets — suitable for marine and coastal deployments. Compatible with KNOT LR9 kit, wAP KR9, and any LoRa device with 900–928 MHz support. Passive antenna — no firmware, no configuration. USD 49.00.

The cAP ac is a dual-band wireless access point designed for ceiling or wall mounting. It offers 2.4GHz and 5GHz coverage, dual Gigabit Ethernet ports with PoE support, and IPsec hardware encryption, making it ideal for both aesthetics and functionality.

The MikroTik DQ+BC0003-DS+ is a 3-metre QSFP56 200G direct-attach breakout cable that splits a single 200 Gigabit port into four independent 50 Gigabit (SFP56) connections. An upgraded successor to the XQ+BC0003-XS+, it retains full backward compatibility with 100G (4×25G) and 40G (4×10G) splitting while adding support for the latest 200G (4×50G) configuration. Designed to work seamlessly with MikroTik's next-generation high-density switches such as the CRS812 DDQ and CRS804 DDQ, it delivers excellent flexibility for high-speed data centre and enterprise network interconnects.

The MikroTik KNOT Embedded LTE4 (EC25-EU&KNe) is a tiny, DIN-rail-mountable industrial LTE Cat4 gateway purpose-built for IoT integrators, automation specialists, and smart-city engineers. Originally designed for coffee and vending machine monitoring, it delivers LTE Cat4 connectivity, Bluetooth 5.4 for BLE sensor integration, built-in GNSS/GPS, eSIM support, a sensor-ready GPIO header, and RouterOS v7 — all in a passively cooled, 7W form factor that fits anywhere space is limited but reliability is critical.

The MikroTik hAP ax S (E62iUGS-2axD5axT) is the most cost-effective Wi-Fi 6 router MikroTik has ever released — delivering triple-chain 5 GHz wireless with up to 900 Mbps real-world throughput, dual-band AX3000 Wi-Fi 6, 5× Gigabit Ethernet, a 2.5G SFP port for fiber-to-home or high-speed NAS, passive PoE-in/out, and full RouterOS v7 — all in a passively cooled wall-mountable enclosure at USD 79. No subscriptions. No locked features. Just RouterOS.

The MikroTik DDQ+DA0001 is a 400G QSFP-DD passive direct attach copper cable (DAC), 1 metre long — the shorter of two DAC options MikroTik offers for the CRS812 and CRS804 400G platforms. With integrated QSFP-DD modules on both ends, it requires no transceivers, no fiber, and no power budget management — simply plug it in and achieve full 400G connectivity between adjacent devices in the same rack. It is the lowest-cost entry point for 400G connectivity on the CRS812 and CRS804 platforms.