MikroTik wAP ax LTE7 Kit Dual-Band Wi-Fi 6 Outdoor
zoom_out_map
chevron_left chevron_right

MikroTik wAP ax LTE7 Kit Dual-Band Wi-Fi 6 Outdoor

The MikroTik wAP ax LTE7 Kit (wAPGR-5HaxD2HaxD&R11e-LTE7) is an evolution of the wAP ac LTE6 — now upgraded with Wi-Fi 6, LTE Cat7, a stronger ARM platform, and improved antenna gain in a next-gen IP66 weatherproof enclosure. It delivers up to 300 Mbps downlink and 100 Mbps uplink with 2×2 MIMO, dual-band coverage at up to 1,774 Mbps combined, expanded LTE band support including B28 and B32, and CAPsMAN support for centralized multi-device management. Passively cooled, vandal-resistant, and wall or pole mountable.

US$169.00 Tax excluded

US$169.00 Tax excluded

new_releases Product available for back-orders
US/Canada
We only offer IC Certified products. For international products, contact us.
Please note!
Ship Charge Will Display As Free Until Ship Address / Location Is Provided To Calculate Ship Charge.

The MikroTik wAP ax LTE7 Kit (wAPGR-5HaxD2HaxD&R11e-LTE7) brings Wi-Fi 6 and LTE Cat7 into a compact, stealthy, outdoor-rated enclosure — designed for rural homes, gas stations, bus stops, public spaces, and any environment where wired internet is unavailable.

The upgraded LTE Cat7 modem doubles upload speeds over the LTE6 predecessor and adds Band 28 (700 MHz) and Band 32 (1500 MHz) for better performance in congested and low-frequency coverage areas. Carrier aggregation (2×CA) improves efficiency and responsiveness on busy networks.

Key features:

- LTE Cat7 — 300 Mbps downlink, 100 Mbps uplink with 2×2 MIMO DL

- LTE FDD bands: B1, B3, B5, B7, B8, B20, B28 (700 MHz), B32 (1500 MHz)

- LTE TDD bands: B38, B40, B41

- 3G R8 fallback — 42.2 Mbps downlink, 5.76 Mbps uplink

- Dual-band Wi-Fi 6 — 574 Mbps at 2.4 GHz (802.11b/g/n/ax) + 1200 Mbps at 5 GHz (802.11a/n/ac/ax)

- 2×2 MIMO on both bands, 6.9 dBi gain at 2.4 GHz, 7 dBi at 5 GHz

- 2× Gigabit Ethernet — PoE-in (802.3af/at, 18–57V) and DC jack (12–57V)

- 1× Micro SIM slot, 1× MiniPCIe slot

- Dual-core ARM 64-bit IPQ-5010, 800 MHz, 256 MB RAM, 128 MB NAND

- CAPsMAN support for centralized multi-device management

- Passive cooling, -30°C to +70°C, MTBF ~200,000 hours at 25°C

- IP66 weatherproof, vandal-resistant anti-tamper screw under MikroTik logo

- RouterOS v7, License Level 4 — free updates for life (minimum 5 years)

- Wall or pole mountable — concealed cable pass-through entry point

- Certified CE, EAC, RoHS

In the box: 24V 0.8A power adapter, Gigabit PoE injector, hose clamp ×1.

Ideal for: rural homes and cottages, gas stations, bus stops, retail outdoor areas, public Wi-Fi hotspots, remote offices, and LTE-based internet backup.

MikroTik
wAPGR-5HaxD2HaxD&R11e-LTE7
New
4752224007711
Product code
wAPGR-5HaxD2HaxD&R11e-LTE7
CPU architecture
ARM 64bit
CPU
Dual-core IPQ-5010 800 MHz
Operating System
RouterOS v7, License level 4
Size of RAM
256 MB
Storage size
128 MB NAND
Number of DC inputs
2 (DC-jack, PoE-In)
DC jack input Voltage
12-57 V
Max Power consumption
13 W
PoE in
802.3af/at
PoE in input Voltage
18-57 V
3G Category
R8 (DL: 42.2 Mbps; UL: 5.76 Mbps)
3G bands
1 (2100 MHz) / 3 (1800 MHz) / 5 (850 MHz) / 8 (900 MHz)
Dimensions
229 x 113 x 43 mm
MiniPCI-e slots
1
LTE Category
7 (DL: 300 Mbps; UL: 100 Mbps)
LTE FDD bands
1 (2100 MHz) / 3 (1800 MHz) / 5 (850 MHz) / 7 (2600 MHz) / 8 (900 MHz) / 20 (800 MHz) / 28 (700 MHz) / 32 (1500 MHz)
LTE TDD bands
38 (2600 MHz) / 40 (2300 MHz) / 41 (2500 MHz)
MIMO DL
2x2
MIMO UL
1x1
TAC
35312597
Operating Temperature
-30°C to +70°C
Wireless Standards
2.4 GHz 802.11b/g/n/ax dual-chain, 5 GHz 802.11a/n/ac/ax dual-chain
Antenna gain
6 dBi (2.4 GHz), 7 dBi (5 GHz)
RAM type
DDR3L
Number of 1G Ethernet ports
2
Wireless interface model
IPQ-5010
LTE modem
R11e-LTE7
Power adapter nominal voltage
24 V
Power adapter nominal current
0.8 A