RB2011UiAS-IN

The RB2011 is a low-cost multi-port device series. Designed for indoor use, and available in many different cases, with a multitude of options. 

The RB2011 is powered by RouterOS, a fully featured routing operating system which has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration and monitoring - are just a few of the vast number of features supported by RouterOS. 

RouterBOARD 2011UiAS-IN, in comparison with the RB2011L series, not only has five Gigabit LAN ports and five Fast Ethernet LAN ports but also has an RJ45 serial port, USB port and more RAM (128MB instead of 64MB). Also, it has a RouterOS L5 license (instead of L4) and a nice touchscreen LCD for configuration. SFP cage is also present (SFP module not included!) 

Tested and recommended to use with MikroTik SFP modules: S-85DLC05D, S-31DLC20D and S-35/53LC20D (not included) 

There is a PoE output function for port #10 - it can power other PoE-capable devices with the same voltage as applied to the unit. The maximum load on the port is 500mA. 

RouterBOARD 2011UiAS-IN comes with a desktop enclosure, LCD panel and power supply. 

A Wall mount kit (product code RBWMK) for the network closet is available for purchase as an optional accessory.

Ethernet test results

1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results