LDF 5-US
zoom_out_map
chevron_left chevron_right

LDF 5-US

Dual chain 5GHz system for long distance links with satellite offset dish antennas

US$49.00

US$49.00 Tax excluded

Back-Order, Contact us for the ETA
new_releases Product available for back-orders
US/Canada
We only offer IC Certified products. For international products, contact us.
Please note!
Ship Charge Will Display As Free Until Ship Address / Location Is Provided To Calculate Ship Charge.

The LDF (Lite Dish Feed) is an outdoor wireless system with a built in antenna, meant to be installed on satellite offset dish antennas. The dish will act as a reflector, amplifying the signal.

This means you can use any available satellite TV dish with an offset mount to quickly deploy powerful long range wireless links. The offset mount is universal at 40mm diameter, and the LDF can easily be placed inside it. Since the LDF itself is a tiny little package, it makes shipping and deployment simple and low cost.

Using a dish of up to 100cm in diameter, it is possible to obtain antenna amplification of up to 33dBi. The device comes preinstalled with RouterOS and is ready to use.

- LDF 5 US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.

- LDF 5 (International) supports 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).

Wireless specifications

5 GHzTransmit (dBm)Receive Sensitivity
6MBit/s 25 -96
54MBit/s 20 -80
MCS0 25 -96
MCS7 19 -75

Ethernet test results

RBLDF-5nD AR9344 (600MHz) 100M 1 port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 8.1 98.4 23.5 96.3 182.5 93.4
Bridging 25 bridge filter rules 8.1 98.4 23.5 96.3 87.6 44.9
Routing none (fast path) 8.1 98.4 23.5 96.3 182.5 93.4
Routing 25 simple queues 8.1 98.4 23.5 96.3 106.6 54.6
Routing 25 ip filter rules 8.1 98.4 23.5 96.3 60.5 31.0
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
MikroTik
RBLDF-5nD-US
4752224003690
10/100 Ethernet ports
1
CPU
AR9344
Product code
RBLDF-5nD-US
Architecture
MIPSBE
CPU core count
1
CPU nominal frequency
600 MHz
Dimensions
84x84x115mm
License level
3
Operating System
RouterOS
Size of RAM
64 MB
Storage size
16 MB
Storage type
FLASH
Tested ambient temperature
-40°C .. +70°C
Max Power consumption
6
PoE in
Passive PoE
PoE in input Voltage
10-30 V
Number of DC inputs
1 (PoE-IN)
Max power consumption without attachments
6W
Wireless 5 GHz number of chains
2
Wireless 5 GHz standards
802.11a/n
Antenna gain dBi for 5 GHz
9
Wireless 5 GHz chip model
AR9344