MikroTik hEX PoE lite (RB750UPr2) — 5-Port PoE Router | Canada

## Buy MikroTik hEX PoE lite (RB750UPr2) in Canada

The MikroTik hEX PoE lite (RB750UPr2) is a compact, affordable 

wired router built for SOHO environments, where clean, cable-free 

setups matter. With passive PoE output on ports 2–5, you can power 

compatible devices like wireless access points, IP cameras, and VoIP 

phones directly from the router — no separate PoE injectors needed.

Running on a 650MHz QCA9531 CPU with 64MB RAM and RouterOS, it 

delivers solid performance for small networks while keeping costs low.

### Key PoE Features

- Passive PoE output on ports 2–5 (same voltage as input: 8–30V DC)

- Max 1A per PoE port — stable power for access points and cameras

- Dual DC inputs: DC jack + PoE-IN

- USB 2.0 port for 3G/4G modem or storage

- Max power consumption: only 3W

### Why Buy From Wireless Netware Technology?

- ✅ IC Certified products — compliant for Canadian use

- ✅ In stock in Toronto — fast Canada-wide shipping

- ✅ Backed by MikroTik-certified trainers and technical support

- ✅ Volume pricing available for ISPs and resellers

### Ideal Use Cases

- Powering wireless access points without PoE switches

- Small office and home (SOHO) wired + PoE networks

- IP camera installations on a budget

- ISP customer premise equipment (CPE) with PoE devices on-site

- VoIP phone deployments

### Technical Specifications

- 5 x 10/100 Ethernet ports (shielded)

- Architecture: MIPSBE, 650MHz QCA9531 CPU

- RAM: 64MB | Storage: 16MB FLASH

- PoE output: Passive PoE on ports 2–5 (8–30V)

- Operating temp: -30°C to +70°C

- Dimensions: 113×89×28mm

- RouterOS with full feature set

For RouterOS training and MikroTik configuration support, visit our

[MikroTik Training Center](https://www.wirelessnetware.ca/training-center-mikrotik-certifications/).

Ethernet test results

1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
3. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results