CCR1016-12S-1S+
zoom_out_map
chevron_left chevron_right
Contact us for back-order

CCR1016-12S-1S+

1U rackmount, 12xSFP cage, 1xSFP+ cage, 16 cores x 1.2GHz CPU, 2GB RAM, LCD panel, Dual Power supplies, RouterOS L6

US$815.00

US$815.00 Tax excluded

block Contact us for back-order
US/Canada
We only offer IC Certified products. For international products, contact us.
Please note!
Ship Charge Will Display As Free Until Ship Address / Location Is Provided To Calculate Ship Charge.

CCR1016 is an industrial grade router with a cutting edge 16 core Tilera CPU. If you need many millions of packets per second - Cloud Core Router is your best choice.

This model has twelve SFP ports and one SFP+ port for 10G connectivity. It is available in a 1U rackmount case and also has a serial console port, a touchscreen LCD and a USB port.

The CCR1016-12S-1S+ comes with redundant power supplies and one RJ45 SFP 10/100/1000M copper module.

Ethernet test results

CCR1016-12S-1S+ Tile 16 core max possible throughput test
Mode Configuration 1518 byte 512 byte 64 byte
kbps Mbps kbps Mbps kbps Mbps
Bridging none (fast path) 1,624.0 19,721.9 4,695.0 19,230.7 15,244.5 7,805.2
Bridging 25 bridge filter rules 1,531.1 18,593.7 1,981.6 8,116.6 2,101.5 1,076.0
Routing none (fast path) 1,624.0 19,721.9 4,695.0 19,230.7 13,186.3 6,751.4
Routing 25 simple queues 1,624.0 19,721.9 2,809.0 11,505.7 3,274.0 1,676.3
Routing 25 ip filter rules 1,062.0 12,896.9 1,191.4 4,880.0 1,298.8 665.0
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

IPsec test results

CCR1016-12S-1S+ CCR1016 series IPsec throughput
Mode Configuration 1400 byte 512 byte 64 byte
kbps Mbps kbps Mbps kbps Mbps
Single tunnel AES-128-CBC + SHA1 130.5 1461.6 123.4 505.4 115.4 59.1
256 tunnels AES-128-CBC + SHA1 363.8 4074.6 413.8 1694.9 425.9 218.1
256 tunnels AES-128-CBC + SHA256 357.6 4005.1 399.2 1635.1 425.9 218.1
256 tunnels AES-256-CBC + SHA1 354.9 3974.9 399.2 1635.1 425.9 218.1
256 tunnels AES-256-CBC + SHA256 348.0 3897.6 384.6 1575.3 403.8 206.7
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1400 byte packet sizes
  3. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
MikroTik
CCR1016-12S-1S+
4752224001955
Product code
CCR1016-12S-1S+
Architecture
TILE
CPU core count
16
CPU nominal frequency
1.2 GHz
Operating System
RouterOS v6
Size of RAM
2 GB
Storage size
128 MB
Storage type
NAND
Tested ambient temperature
-20C .. +60C
Max Power consumption
44W
Number of AC inputs
2
AC input range
100-240
SFP DDMI
Yes
SFP ports
12
SFP+ ports
1
Serial port
RS232
Number of USB ports
1
USB Power Reset
Yes
USB slot type
microUSB type AB
Max USB current (A)
1
CPU temperature monitor
Yes
Current Monitor
Yes
Voltage Monitor
Yes
PCB temperature monitor
Yes
You might also like
Customers who bought this product also bought: