NetMetal ac2
More power and advanced features, with the same design philosophy as its predecessors – the new NetMetal ac² AP is sturdy, reliable, easy to use and extremely capable. This is the best way to add IPsec hardware acceleration to your backhaul link! We have added an out-of-the-box 2.4/5Ghz dual-band support – no need for additional tinkering!

We only offer IC Certified products. For international products, contact us.

Ship Charge Will Display As Free Until Ship Address / Location Is Provided To Calculate Ship Charge.
Description
More power and advanced features, with the same design philosophy as its predecessors – the new NetMetal ac² AP is sturdy, reliable, easy to use and extremely capable. This is the best way to add IPsec hardware acceleration to your backhaul link!
We have added an out-of-the-box 2.4/5 GHz dual-band support – no need for additional tinkering! Two RP-SMA connectors allow adding an antenna of your choice.
If necessary, you can adapt the NetMetal ac² for lower range use with such antennas as our HGO-antenna-OUT screw-on Omni antenna unit.
It provides 3.3 dBi gain for the 2.4 GHz band and 5.5-7.1 dBi gain for the 5 GHz band. The enclosure has an IP rating of IP54 with protection against splashing from any angle, but it can still be opened and closed with one hand. Very handy in rough environments!
NetMetal ac² can handle massive loads, as it features an improved 4-core CPU and 256 MB RAM.
There is a mini PCIe slot for an LTE or other wireless modules and an SFP port for fiber. The NetMetal ac² can be a very adaptable addition for all kinds of setups.
Data sheet
Data sheet
- 10/100/1000 Ethernet ports
- 1
- CPU
- IPQ-4019
- Product code
- RBD23UGS-5HPacD2HnD-NM
- Architecture
- ARM 32 bit
- CPU core count
- 4
- CPU nominal frequency
- 716.8 MHz
- Dimensions
- 143 x 247 x 48 mm
- License level
- 4
- Operating System
- RouterOS
- Size of RAM
- 256 MB
- Storage size
- 16 MB
- Storage type
- SPI Flash
- Tested ambient temperature
- -40°C .. +70°C
- Max Power consumption
- 28 W
- PoE in
- 802.3 af/at
- PoE in input Voltage
- 24 - 57 V
- Number of DC inputs
- 2 (DC jack, PoE-IN)
- DC jack input Voltage
- 12 - 57 V
- SFP DDMI
- Yes
- SFP ports
- 1
- Number of SIM slots
- 1/Micro SIM
- Number of USB ports
- 1
- USB Power Reset
- Yes
- USB slot type
- USB Type A
- Max USB current (A)
- 1
- Voltage Monitor
- Yes
- PCB temperature monitor
- YES
- Max power consumption without attachments
- 12 W
- MiniPCI-e slots
- 1
- Certification
- FCC, IC, IP54