LHG 60G
zoom_out_map
chevron_left chevron_right

LHG 60G

For use as 60GHz CPE in Point-to-Multipoint setups for connections up to 800m with a 60GHz Base Stations, with Gigabit Ethernet port for speeds up to 1Gbps

US$149.00 Tax excluded

US$149.00 Tax excluded

Back-Order, Contact us for the ETA
new_releases Product available for back-orders
US/Canada
We only offer IC Certified products. For international products, contact us.
Please note!
Ship Charge Will Display As Free Until Ship Address / Location Is Provided To Calculate Ship Charge.

LHG 60G – a high-speed 60 GHz CPE point-to-multipoint unit, the perfect solution for crowded wireless spectrum

No need to share the frequency with your neighbours and lose valuable time – LHG 60G offers a simple and effective 60 GHz solution for wireless connection where the 2 GHz and 5GHz wireless space is crowded and unreliable. Connect up to eight of these units to a 60 GHz access point, such as our wAP60G AP or wAP 60Gx3 AP, and enjoy the smooth connection with data rate up to 2 Gbps.

The sufficient point-to-point distance between two LHG 60G units is up to 1500 meters, point-to-multipoint – up to 800 meters. The grid design ensures protection against wind, and it can withstand temperatures from -40 C‎° to +70 C‎°. The antenna element is built into the wireless unit – no loss on cables.

LHG 60G is shipped with an Aim tool for natural precision alignment and durable metal LHG mount. Order it today and forget about wireless interference!

IPsec test results

RBLHGG-60adr2 IPQ-4018 IPsec throughput
Mode Configuration 1400 byte 512 byte 64 byte
kbps Mbps kbps Mbps kbps Mbps
Single tunnel AES-128-CBC + SHA1 37.9 424.5 59 241.7 61.6 31.5
256 tunnels AES-128-CBC + SHA1 36 403.2 38.5 157.7 39.8 20.4
256 tunnels AES-128-CBC + SHA256 36 403.2 38.5 157.7 39.8 20.4
256 tunnels AES-256-CBC + SHA1 34.4 385.3 37.9 155.2 39.8 20.4
256 tunnels AES-256-CBC + SHA256 34.4 385.3 37.9 155.2 39.8 20.4
  1. All tests are done with Xena Networks specialized test equipment (XenaBay) and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1400 byte packet sizes
  3. Test results show device maximum performance and are reached using mentioned hardware and software configuration, and different configurations most likely will result in lower results
MikroTik
RBLHGG-60ad
4752224004055
10/100/1000 Ethernet ports
1
CPU
IPQ-4019
Product code
RBLHGG-60ad
Architecture
ARM 32bit
CPU core count
4
CPU nominal frequency
716 MHz
License level
3
Size of RAM
256MB
Storage size
16MB
Storage type
FLASH
Tested ambient temperature
-40°C to 70°C
Max Power consumption
7W
PoE in
802.3af/at
PoE in input Voltage
12-57 V
Number of DC inputs
1 (PoE-IN)