LDF 5 ac
zoom_out_map
chevron_left chevron_right

LDF 5 ac

Dual chain 5GHz system with Gigabit Ethernet and 802.11ac support for long distance links with satellite offset dish antennas

US$68.00

US$68.00 Tax excluded

Back-Order, Contact us for the ETA
new_releases Product available for back-orders
US/Canada
We only offer IC Certified products. For international products, contact us.
Please note!
Ship Charge Will Display As Free Until Ship Address / Location Is Provided To Calculate Ship Charge.

The LDF (Lite Dish Feed) is an outdoor wireless system with a built-in antenna, meant to be installed on satellite offset dish antennas. The dish will act as a reflector, amplifying the signal.

This means you can use any available satellite TV dish with an offset mount to quickly deploy powerful long-range wireless links. The offset mount is universal at 40 mm diameter, and the LDF can easily be placed inside it. Since the LDF itself is a tiny little package, it makes shipping and deployment simple and low cost.

LDF 5 ac is equipped with a Gigabit port and supports 802.11ac for higher throughput.

- LDF 5 ac-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.

- LDF 5 ac (International) supports 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).

Wireless specifications

5 GHzTransmit (dBm)Receive Sensitivity
6MBit/s 25 -96
54MBit/s 21 -80
MCS0 25 -96
MCS7 20 -75
MCS9 18 -70

Ethernet test results

RB LDFG-5acD IPQ-4018 1G one port test
Mode Configuration 1518 byte 512 byte 64 byte
kbps Mbps kbps Mbps kbps Mbps
Bridging none (fast path) 82,2 998.2 243,9 999.0 1484,8 760.2
Bridging 25 bridge filter rules 82,2 998.2 243,9 999.0 359,2 183.9
Routing none (fast path) 82,2 998.2 243,9 999.0 1488 761.9
Routing 25 simple queues 82,2 998.2 243,9 999.0 506,3 259.2
Routing 25 IP filter rules 82,2 998.2 240,8 986.3 242,9 124.4
  1. All tests are done with Xena Networks specialized test equipment (XenaBay), and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Test results show device maximum performance, and are reached using mentioned hardware and software configuration; different configurations most likely will result in lower results

IPsec test results

RB LDFG-5acD IPQ-4018 IPsec throughput
Mode Configuration 1400 byte 512 byte 64 byte
kbps Mbps kbps Mbps kbps Mbps
Single tunnel AES-128-CBC + SHA1 37.9 424.5 59 241.7 61.6 31.5
256 tunnels AES-128-CBC + SHA1 36 403.2 38.5 157.7 39.8 20.4
256 tunnels AES-128-CBC + SHA256 36 403.2 38.5 157.7 39.8 20.4
256 tunnels AES-256-CBC + SHA1 34.4 385.3 37.9 155.2 39.8 20.4
256 tunnels AES-256-CBC + SHA256 34.4 385.3 37.9 155.2 39.8 20.4
  1. All tests are done with Xena Networks specialized test equipment (XenaBay), and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1400 byte packet sizes
  3. Test results show device maximum performance, and are reached using mentioned hardware and software configuration; different configurations most likely will result in lower results
MikroTik
RBLDFG-5acD
4752224001429
10/100/1000 Ethernet ports
1
Product code
RBLDFG-5acD
Architecture
ARM 32bit
CPU
IPQ-4018
CPU core count
4
CPU nominal frequency
716 MHz
Dimensions
84mm x 84mm x 115mm
License level
3
Operating System
RouterOS
Size of RAM
256 MB
Storage size
16 MB
Storage type
FLASH
Tested ambient temperature
-40°C .. +70°C
Max Power consumption
8 W
PoE in
Passive PoE
PoE in input Voltage
10-28 V
Number of DC inputs
1 (PoE-IN)
Max power consumption without attachments
8 W
Wireless 5 GHz number of chains
2
Wireless 5 GHz standards
802.11a/n/ac
Antenna gain dBi for 5 GHz
9
Wireless 5 GHz chip model
IPQ-4018