hAP ac-US

hAP ac-US

Dual concurrent triple chain 2.4/5GHz AP, 802.11ac/a/n/b/g, Five Gigabit Ethernet ports, PoE-out on port 5, SFP, USB for 3G/4G support or storage

US$129.00
Back-Order, Contact us for the ETA
 Back-Order, delivery 2-3 days
  US/Canada

We only offer IC Certified products. For international products, contact us.

  Please note!

Ship Charge Will Display As Free Until Ship Address / Location Is Provided To Calculate Ship Charge.

Description

The hAP ac is our most universal home or office wireless device. It is a dual band device with Gigabit ports that allow the full advantages of 802.11ac technology speed, while maintaining compatibility with legacy devices in 2GHz 802.11 b/g/n and 5GHz a/n modes.

The omnidirectional antennas allow to mount the hAP ac in any location, and the high power transmitter will ensure good coverage for the mobile devices in your home, office or public location.

Other helpful features include a USB port for attaching extra storage or a 3G/4G modem, PoE output on the last Ethernet port, to power other RouterBOARD devices without needing an extra power adapter and an SFP cage, for connecting active or passive optical network modules.

We have two versions available.

- RB962UiGS-5HacT2HnT-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.

- RB962UiGS-5HacT2HnT (International) supports 2412-2484MHz and 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).

Wireless specifications

2.4 GHzTransmit (dBm)Receive Sensitivity
1MBit/s 29 -100
11MBit/s 29 -94
6MBit/s 29 -96
54MBit/s 26 -81
MCS0 29 -96
MCS7 25 -77
5 GHzTransmit (dBm)Receive Sensitivity
6MBit/s 28 -96
54MBit/s 25 -81
MCS0 28 -96
MCS7 24 -77
MCS9 21 -72

Ethernet test results

RB962UiGS-5HacT2HnT QCA9558 1G all port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 161.9 1,966.1 345.5 1,415.2 435.6 223.0
Bridging 25 bridge filter rules 125.5 1,524.1 126.5 518.1 128.8 65.9
Routing none (fast path) 161.9 1,966.1 334.2 1,368.9 397.9 203.7
Routing 25 simple queues 161.9 1,966.1 183.9 753.3 203.3 104.1
Routing 25 ip filter rules 78.1 948.4 77.8 318.7 77.5 39.7
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

Data sheet

MikroTik
RB962UiGS-5HacT2HnT-US
New product
20 cm
14 cm
6 cm
1 kg
Data sheet
10/100/1000 Ethernet ports
5
Product code
RB962UiGS-5HacT2HnT
Architecture
MIPSBE
CPU
QCA9558
CPU core count
1
CPU nominal frequency
720 MHz
Dimensions
114 x 137 x 29mm
License level
4
Operating System
RouterOS
Size of RAM
128 MB
Storage size
16 MB
Storage type
FLASH
Tested ambient temperature
-20C .. +60C
Max Power consumption
17
PoE in
Passive PoE
PoE out
Passive PoE
PoE in input Voltage
11-57 V
Number of DC inputs
2 (DC jack, PoE-IN)
DC jack input Voltage
11-57 V
SFP ports
1
Number of USB ports
1
USB Power Reset
Yes
USB slot type
USB type A
Max USB current (A)
1
Voltage Monitor
Yes
PCB temperature monitor
Yes
Wireless 2.4 GHz number of chains
3
Wireless 2.4 GHz standards
802.11b/g/n
Antenna gain dBi for 2.4 GHz
2.5
Wireless 2.4 GHz chip model
QCA9558
Max out per port output - input (less than 30 V)
700 mA
Max total out (A)
700 mA
Max power consumption without attachments
17W
Max out per port output (input more than 30 V)
0 mA
Wireless 5 GHz number of chains
3
Wireless 5 GHz standards
802.11a/n/ac
Antenna gain dBi for 5 GHz
2
Wireless 5 GHz chip model
QCA9880

Customers who bought this product also bought: