netFiber 9
zoom_out_map
chevron_left chevron_right
New

netFiber 9

A remarkable outdoor switch for setting up an optical 10G network that can even perform some light routing. The spiritual successor to the beloved FiberBox. Gigabit Ethernet, SFP/SFP+, PoE.

US$249.00

US$249.00 Tax excluded

Back-Order, Contact us for the ETA
new_releases Product available for back-orders
US/Canada
We only offer IC Certified products. For international products, contact us.
Please note!
Ship Charge Will Display As Free Until Ship Address / Location Is Provided To Calculate Ship Charge.

netFiber 9 is a powerful outdoor switch with SFP, SFP+, and Gigabit Ethernet. It features a powerful ARM v7 CPU, 256 MB of RAM, 4x 10G SFP+ ports, and an advanced Marvell switch-chip that can handle even the heaviest loads. The Gigabit Ethernet port is not just for management purposes. It has a direct connection to the switch chip – so you can enjoy full gigabit speed. This port also supports PoE-in, so you don’t have to rely on the DC jack for powering in tight, hard- to-reach spots.

There is a console port, followed by five regular SFP ports and four SFP+ ports for that sweet 10 Gbps networking. This means there might be quite a lot of wires for you to organize at some point. That’s why we designed the case to have some handy little additional features on the bottom of the case to help you keep everything neat and tidy.

The sturdy case provides decent protection in dusty environments with occasional splashes of water. Perfect for outdoors with some light coverage – like a roof overhang or a simple cabinet. There is a massive heatsink on the back that serves two purposes. Not only it provides outstanding heat dissipation, it also moves the center of mass towards the side with all the mounting options – keeping the board firm and strong upon installation. The package includes metal hose clamps and screws, so you can attach the netFiber to a pole, wall, or mast right away.

netFiber 9 is an amazing tool for anyone working with connections over 100 meters while keeping data loss and ping low. Optic fiber can be a great alternative to copper if you are worried about electromagnetic interference or maybe even tampering and eavesdropping. With 10 ports, a powerful CPU, and a rugged case, netFiber 9 is a real bargain that will make your network management so much easier!

Switching results

CRS310-1G-5S-4S+OUT
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Switching Non blocking Layer 2 throughput 3,738.6 45,401.8 10,808.3 44,270.7 68,452.4 35,047.6
Switching Non blocking Layer 2 capacity 3,738.6 90,803.6 10,808.3 88,541.4 68,452.4 70,095.2
Switching Non blocking Layer 1 throughput 3,738.6 46,000.0 10,808.3 46,000.0 68,452.4 46,000.0
Switching Non blocking Layer 1 capacity 3,738.6 92,000.0 10,808.3 92,000.0 68,452.4 92,000.0

Ethernet test results

CRS310-1G-5S-4S+OUT 98DX226 all port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 104,1 1264.2 119,1 487.8 141,1 72.2
Bridging 25 bridge filter rules 59,7 725.0 59,7 244.5 70,4 36.0
Routing none (fast path) 104,1 1264.2 129,7 531.3 143,5 73.5
Routing 25 simple queues 56,7 688.6 57,9 237.2 65,2 33.4
Routing 25 ip filter rules 44,1 535.6 45,6 186.8 48,4 24.8
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

The device has an operating system preinstalled and licensed. No separate purchase is necessary and the product is ready to use. The device includes free software updates for the life of the product or a minimum of 5 years starting from date of purchase..


MikroTik
CRS310-1G-5S-4S+OUT
10/100/1000 Ethernet ports
1
CPU
98DX226S
Product code
CRS310-1G-5S-4S+OUT
Architecture
ARM 32bit
CPU core count
1
CPU nominal frequency
800 MHz
License level
RouterOS L5
Size of RAM
256 MB
Storage size
16 MB
Storage type
FLASH
Tested ambient temperature
-40°C to 70°C
Max Power consumption
16.3 W
PoE in
802.3af/at
PoE in input Voltage
18-57 V
Number of DC inputs
2 (DC jack, PoE-IN)
DC jack input Voltage
18-57 V
SFP ports
5
SFP+ ports
4
Serial port
RJ45
CPU temperature monitor
Yes
Voltage Monitor
Yes
Max power consumption without attachments
10 W
chipset
98DX226S
Certification
CE, EAC, ROHS
MTBF
Approximately 200'000 hours at 25C
Cooling type
Passive
IP
IP54
You might also like