Our webstore uses cookies to offer a better user experience and we consider that you are accepting their use if you keep browsing the website.
Got it! More info

For more details please visit: http://www.cookielaw.org/the-cookie-law/

wAP LTE kit US

Small weatherproof wireless access point with United States LTE modem

US$119.00

Be sure to check availability date

Quantity

US/Canada

We only offer IC Certified products. For international products, contact us.

Please note!

Ship Charge Will Display As Free Until Ship Address / Location Is Provided To Calculate Ship Charge.

Description

The wAP LTE Kit-US is a small weatherproof wireless access point with a built-in cellular modem that supports 3G and 4G (LTE) connectivity. Connect to the wAP’s integrated 802.11b/g/n wireless and access the LTE network from your phone or any other wireless device. The wAP LTE also has one 10/100 Ethernet LAN port for your wired devices.

LTE cards are connected to two internal antennas with u.FL connectors, so if you want, you can unplug the connectors and add your external LTE antenna for more extensive coverage. The unit has the several powering options - 9-30v PoE-in by Ethernet port, DC jack and Automotive connector, convenient in mobile devices like a car, bus or train.

RBwAPR-2nD&R11e-LTE-US includes LTE modem that supports LTE bands 2,4,5 and 12, mostly used by mobile operators in United States, Canada and Latin America.

Wireless specifications

2.4 GHz	Transmit (dBm)	Receive Sensitivity
1MBit/s	22	-96
11MBit/s	22	-89
6MBit/s	20	-93
54MBit/s	18	-74
MCS0	20	-93
MCS7	16	-71

Ethernet test results

RBwAPR-2nD&R11e-LTE-US		QCA9531 100M one port test
Mode	Configuration	1518 byte		512 byte		64 byte
Mode	Configuration	kbps	Mbps	kbps	Mbps	kbps	Mbps
Bridging	none (fast path)	8.1	98.4	23.5	96.3	173.6	88.9
Bridging	25 bridge filter rules	8.1	98.4	23.5	96.3	70.9	36.3
Routing	none (fast path)	8.1	98.4	23.5	96.3	160.8	82.3
Routing	25 simple queues	8.1	98.4	23.5	96.3	90.8	46.5
Routing	25 IP filter rules	8.1	98.4	23.5	96.3	43.2	22.1

All tests are done with Xena Networks specialized test equipment (XenaBay) and done according to RFC2544 (Xena2544)
Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
Test results show device maximum performance, and are reached using mentioned hardware and software configuration; different configurations most likely will result in lower results

Data sheet

10/100 Ethernet ports: 1
Product code: RBwAPR-2nD&R11e-LTE-US
Architecture: MIPSBE
CPU: QCA9531
CPU core count: 1
CPU nominal frequency: 650 MHz
Dimensions: 185 x 85 x 30 mm
License level: 4
Operating System: RouterOS
Size of RAM: 64 MB
Storage size: 16 MB
Storage type: FLASH
Tested ambient temperature: -40°C .. +60°C tested
Max Power consumption: 8
PoE in: Passive PoE
PoE in input Voltage: 9-30 V
Number of DC inputs: 3 (DC jack, PoE-IN, Automotive)
DC jack input Voltage: 9-30 V
Number of SIM slots: 1 Modem (Mini SIM)
Voltage Monitor: Yes
PCB temperature monitor: Yes
Wireless 2.4 GHz number of chains: 2
Wireless 2.4 GHz standards: 802.11b/g/n
Antenna gain dBi for 2.4 GHz: 2
Wireless 2.4 GHz chip model: QCA9531
Max power consumption without attachments: 8W
MiniPCI-e slots: 1
Automotive input Voltage: 9-30 V
3G Category: R8 (42.2Mbps Downlink, 5.76Mbps Uplink) / R7 (21Mbps Downlinks, 5.76Mbps Uplink)
LTE Category: 4 (150Mbps Downlink, 50Mbps Uplink)
LTE FDD bands: 2 (1900MHz) / 4 (1700MHz) / 5 (850MHz) / 12 (700MHz)