CCR1036-8G-2S+, CCR1036
zoom_out_map
chevron_left chevron_right

CCR1036-8G-2S+EM

1U rackmount, 8x Gigabit Ethernet, 2xSFP+ cages, LCD, 36 cores x 1.2GHz CPU, 8GB RAM, 41.5mpps fastpath, Up to 28Gbit/s throughput, RouterOS L6, Dual PSU

US/Canada
We only offer IC Certified products. For international products, contact us.
Please note!
Ship Charge Will Display As Free Until Ship Address / Location Is Provided To Calculate Ship Charge.

Our fastest router has now become even better - the new CCR1036-8G-2S+ now has two SFP+ ports for 10G interface support (SFP+ module available separately). It uses the same 36 core Tilera CPU as our other CCR1036 model and delivers the same performance, but now, ten-gigabit links are possible. 

The device comes in a 1U rackmount case, has two SFP+ ports, eight Gigabit Ethernet ports and a serial console port. 

The new version of CCR1036-8G-2S+EM has onboard 8GB of RAM, onboard M.2 slot, full-size USB slot and dual PSU for redundancy!

Supports both SFP (1.25G) and SFP+ (10G) modules

Ethernet test results

CCR1036-8G-2S+r2 Tile 36 core max possible throughput test
Mode Configuration 1518 byte 512 byte 64 byte
kbps Mbps kbps Mbps kbps Mbps
Bridging none (fast path) 2275.7 27636.1 6578.9 26947.2 41666.7 21333.4
Bridging 25 bridge filter rules 2275.7 27636.1 5179.7 21216.1 5163.5 2643.7
Routing none (fast path) 2275.7 27636.1 6578.9 26947.2 41666.7 21333.4
Routing 25 simple queues 2275.7 27636.1 6553.3 26842.3 7643.1 3913.3
Routing 25 IP filter rules 1825.7 22171.3 3033.9 12426.9 3049.7 1561.4
  1. All tests are done with Xena Networks specialized test equipment (XenaBay), and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

IPsec test results

CCR1036-8G-2S+r2 CCR1036 series IPsec throughput
Mode Configuration 1400 byte 512 byte 64 byte
kbps Mbps kbps Mbps kbps Mbps
Single tunnel AES-128-CBC + SHA1 130.5 1461.6 123.4 505.4 115.4 59.1
256 tunnels AES-128-CBC + SHA1 912.9 10224.5 1037.4 4249.2 1053.1 539.2
256 tunnels AES-128-CBC + SHA256 902.7 10110.2 1032.8 4230.3 1025.7 525.2
256 tunnels AES-256-CBC + SHA1 901.0 10091.2 1028.3 4211.9 998.2 511.1
256 tunnels AES-256-CBC + SHA256 892.5 9996.0 982.9 4026.0 970.7 497.0
  1. All tests are done with Xena Networks specialized test equipment (XenaBay) and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1400 byte packet sizes
  3. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

MikroTik
CCR1036-8G-2S+
10/100/1000 Ethernet ports
8
Product code
CCR1036-8G-2S+
Architecture
TILE
CPU
TLR4-03680
CPU core count
36
CPU nominal frequency
1.2 GHz
Dimensions
355x145x44mm
License level
6
Operating System
RouterOS
Size of RAM
8 GB
Storage size
1 GB
Storage type
NAND
Tested ambient temperature
-20C .. +60C
Max Power consumption
73W
Number of AC inputs
2
AC input range
100-240
SFP DDMI
Yes
SFP+ ports
2
Memory card type
microSD
Memory Cards
1
Serial port
RJ45
Number of USB ports
1
USB Power Reset
Yes
Max USB current (A)
1
CPU temperature monitor
Yes
PCB temperature monitor
Yes
Mode
Yes